Mastery Assessments

Table of contents:

Project 3I. Fitness

Objectives: 1. Format Slide Text; 2. Modify Placeholders; 3. Modify Slide Master Elements; 4. Insert Clip Art; 5. Apply Bullets and Numbering; 8. Apply an Animation Scheme.

In the following Mastery Assessment you will format a presentation regarding a study conducted by the Pediatric Research Department at University Medical Center. Your completed presentation will look similar to the one shown in Figure 3.39.

Figure 3.39.

For Project 3I, you will need the following files:

p03I_Fitness

p03I_Children

You will save your presentation as

3I_Fitness_Firstname_Lastname

 

1.

From your student files, open the file p03I_Fitness. Apply the Layers design template (not Glass Layers) and then apply the color scheme that contains a white background and a teal arrow with a red shadow. Replace the Times New Roman font with Verdana. Save the file as 3I_Fitness_Firstname_Lastname
 

2.

On Slide 1, format the title with bold, shadow, and then italic.
 

3.

Display the slide master (not the title master) and customize the first level bullet using the large diamond in the Wingdings font. Change the color of the diamond bullet to dark red and make it 100 percent the size of the text. Return the presentation to Normal View and scroll through the slides to view your changes.
 

4.

Display Slide 2 and insert a clip art using the keyword Kids. Choose the blue and white picture of several children running, riding a bike, and riding a skateboard. Move the picture so that it is centered horizontally on the slide below the bulleted list. Refer to Figure 3.39 if you are unsure of which picture to insert. If the picture is not available, insert the p03I_Children file from your student data files.
 

5.

Display Slide 3 and apply bold to the bullet pointOverall Results. Do not bold the subordinate bullet points. Use the repeat key to apply bold to the three remaining first level bullets points. Be sure that you do not bold any of the subordinate bullet points.
 

6.

Display Slide 4 and apply bold and italic to the first bullet pointEvaluate. Do not apply the formatting to the subordinate bullet points. Use Format Painter to copy the formatting from the word Evaluate to the two remaining first level bullet points.
 

7.

Display Slide 5 and apply numbering to the bulleted list. Change the numbering scheme so that the numbers are followed by a parenthesis. Size the numbered list placeholder so that its boundary box fits tightly around the text without any of the text wrapping to the second line. Drag the placeholder down so that the last numbered point aligns with the lower edge of the teal bar. The placeholder should be approximately vertically centered on the slide. Change the title text font size to 32.
 

8.

Apply the Bounce animation scheme to Slide 1, and then apply the Float animation scheme to Slides 2 through 5. View your presentation.
 

9.

Create a header and footer for the notes and handouts that includes the date updated automatically and a footer with the text 3I_Fitness_Firstname_Lastname Clear all other header and footer options.
 

10.

Save the file. Submit the presentation either printed or electronically, as directed by your instructor. To submit a printout of the presentation, print grayscale handouts, 6 slides per page in horizontal order. Close the file.
 

End

You have completed Project 3I


Project 3J. Radiology

Objectives: 1. Format Slide Text; 2. Modify Placeholders; 3. Modify Slide Master Elements; 5. Apply Bullets and Numbering; 6. Customize a Color Scheme; 7. Modify the Slide Background; 8. Apply an Animation Scheme.

In the following Mastery Assessment, you will create a presentation regarding the use of a new radiology procedure for the emergency room at University Medical Center. Your completed presentation will look similar to the one shown in Figure 3.40.

Figure 3.40.

For Project 3J, you will need the following files:

New blank presentation

p03J_Technology

You will save your presentation as

3J_Radiology_Firstname_Lastname

 

1.

Start a new presentation based on the dark blue Orbit design template. Insert slides from the Microsoft Word file p03J_Technology. In the Outline/Slides pane, notice that the first slide is blank. Delete the first slide and then apply the Title Slide layout to the new first slide. Save the file as 3J_Radiology_Firstname_Lastname
 

2.

Apply the dark green color scheme with the lighter green accents to the presentation. Edit the color scheme so that the Title text displays in white, located in the center of the color honeycomb.
 

3.

Display Slide 1. Change the font size for the title to 60 and apply bold. Drag the placeholder so that its left edge aligns with the left edge of the slide.
 

4.

Size the subtitle placeholder so that the boundary box fits tightly to the text, then position the placeholder in the lower right corner of the slide. Change the subtitle text to title case.
 

5.

Display Slide 2 and remove the bullet from the text. Center the text and then adjust the size of the placeholder so that the text displays on three lines. Drag the placeholder down approximately 1 inch, and then deselect the placeholder.
 

6.

Format the background of Slide 2 by applying a two-color gradient fill. For Color 1, choose the first colordark greenand for Color 2, choose the sixth color in the color scheme. Apply the Shading style From title and choose the second Variant. Omit the background graphics from this slide.
 

7.

Display the Slide Master. Change the first level bullet to a picture bullet using the search text geared up factory Choose the large yellow starburst. Change the color of the second level bullet to the last color in the color schemelight green. Return to Normal view.
 

8.

Display Slide 4 and demote the second and fourth bullet points. Select the word Quick, apply italic and change the font color to light greenthe last color in the color scheme. Use Format Painter to copy the format to the word Better.
 

9.

Apply an animation scheme of your choice to the presentation and then view the slide show.
 

10.

Create a header and footer for the notes and handouts that includes the date updated automatically and a footer with the text 3J_Radiology_Firstname_Lastname Clear all other header and footer options.
 

11.

Save the file. Submit the presentation either printed or electronically, as directed by your instructor. To submit a printout of the presentation, print grayscale handouts, 4 slides per page in horizontal order. Close the file.
 

End

You have completed Project 3J



Problem Solving

Windows XP

Outlook 2003

Internet Explorer

Computer Concepts

Word 2003

Chapter One. Creating Documents with Microsoft Word 2003

Chapter Two. Formatting and Organizing Text

Chapter Three. Using Graphics and Tables

Chapter Four. Using Special Document Formats, Columns, and Mail Merge

Excel 2003

Chapter One. Creating a Worksheet and Charting Data

Chapter Two. Designing Effective Worksheets

Chapter Three. Using Functions and Data Tables

Access 2003

Chapter One. Getting Started with Access Databases and Tables

Chapter Two. Sort, Filter, and Query a Database

Chapter Three. Forms and Reports

Powerpoint 2003

Chapter One. Getting Started with PowerPoint 2003

Chapter Two. Creating a Presentation

Chapter Three. Formatting a Presentation

Integrated Projects

Chapter One. Using Access Data with Other Office Applications

Chapter Two. Using Tables in Word and Excel

Chapter Three. Using Excel as a Data Source in a Mail Merge

Chapter Four. Linking Data in Office Documents

Chapter Five. Creating Presentation Content from Office Documents



Go! With Microsoft Office 2003 Brief
GO! with Microsoft Office 2003 Brief (2nd Edition)
ISBN: 0131878646
EAN: 2147483647
Year: 2004
Pages: 448

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net