You can find the solutions to these questions in Appendix A, "Answers to Review Questions."
1. |
Which of the following two codecs do current Cisco IP Phones support? (Choose two.)
|
2. |
Which of the following PoE standards does the Cisco IP Phone 7961G support? (Choose two.)
|
3. |
Which of the following devices has a built-in Ethernet switch? (Choose three.)
|
4. |
Which of the following Cisco IP Phones provides video-processing capabilities without the VT Advantage software?
|
5. |
Place these steps in the order that an IP Phone must go through before it can register with Cisco CallManager.
|
6. |
Which of the following options can you configure on a DHCP server to deliver the IP address of a TFTP server to a Cisco IP Phone?
|
7. |
Most Cisco IP Phones provide built-in ______ processing, which allows them to read data stored in this industry standard format.
|
8. |
What is the difference between the Cisco IP Phone 7960 and Cisco IP Phone 7961? (Choose two.)
|
9. |
A company wants to migrate to a VoIP network, but it has an expensive all-in-one voice-fax-copier device that it wants to connect to the VoIP network. Which device would you recommend?
|
10. |
A firm wants to install a Cisco IP Phone in the lobby area. The IP telephony network runs only the G.729a codec. The IP Phone should support a single line and all standard features. An LCD display is not required because cost is a concern. Which IP Phone would best meet these requirements?
|
Part I: Cisco CallManager Fundamentals
Introduction to Cisco Unified Communications and Cisco Unified CallManager
Cisco Unified CallManager Clustering and Deployment Options
Cisco Unified CallManager Installation and Upgrades
Part II: IPT Devices and Users
Cisco IP Phones and Other User Devices
Configuring Cisco Unified CallManager to Support IP Phones
Cisco IP Telephony Users
Cisco Bulk Administration Tool
Part III: IPT Network Integration and Route Plan
Cisco Catalyst Switches
Configuring Cisco Gateways and Trunks
Cisco Unified CallManager Route Plan Basics
Cisco Unified CallManager Advanced Route Plans
Configuring Hunt Groups and Call Coverage
Implementing Telephony Call Restrictions and Control
Implementing Multiple-Site Deployments
Part IV: VoIP Features
Media Resources
Configuring User Features, Part 1
Configuring User Features, Part 2
Configuring Cisco Unified CallManager Attendant Console
Configuring Cisco IP Manager Assistant
Part V: IPT Security
Securing the Windows Operating System
Securing Cisco Unified CallManager Administration
Preventing Toll Fraud
Hardening the IP Phone
Understanding Cryptographic Fundamentals
Understanding the Public Key Infrastructure
Understanding Cisco IP Telephony Authentication and Encryption Fundamentals
Configuring Cisco IP Telephony Authentication and Encryption
Part VI: IP Video
Introducing IP Video Telephony
Configuring Cisco VT Advantage
Part VII: IPT Management
Introducing Database Tools and Cisco Unified CallManager Serviceability
Monitoring Performance
Configuring Alarms and Traces
Configuring CAR
Using Additional Management and Monitoring Tools
Part VIII: Appendix
Appendix A. Answers to Review Questions
Index