Using the Tool for Auto-Registered Phone Support

Table of contents:

Review Questions

You can find the solutions to these questions in Appendix A, "Answers to Review Questions."

1.

Which of the following configurations can you add to the CallManager database in bulk using BAT? (Choose three.)

  1. Route Groups
  2. Route Patterns
  3. Users
  4. IP Phones
  5. Phone Templates
  6. Device Profiles
2.

For TAPS to function correctly, what must you enable on at least one Cisco CallManager server?

  1. Voice Media Streaming Application service
  2. Auto-Registration
  3. Cisco IPCC
  4. All of the above
   
3.

Which two pieces of information are required to perform a successful device import using BAT? (Choose two.)

  1. a tab-delimited text file
  2. a comma-separated text file
  3. a valid device template
  4. CallManager 4.x or later
4.

When you install BAT, the installation process stores an Excel template on the hard drive of the CallManager server. Where is the file located?

  1. C:CiscoBAT
  2. C:Program FilesCiscoBAT
  3. C:BAT
  4. C:CiscoWebsBATExcelTemplate
5.

On which CallManager server should you install the Cisco BAT utility?

  1. the Publisher server
  2. a Subscriber server participating in call processing
  3. a Subscriber server not participating in call processing
  4. a CallManager server not performing database replication
6.

You have created an entry in a CSV file that defines an IP Phone with two lines. You combine this CSV file with a BAT device template that defines an IP Phone with six lines. What happens?

  1. The BAT utility inserts the IP Phone into the CallManager database with only the two lines defined in the CSV file.
  2. The BAT utility inserts the IP Phone into the CallManager database with the six lines defined in the device template.
  3. The BAT utility rejects the configuration and produces an HTTP 4xx error.
  4. The BAT utility prompts you for the configuration for the additional four lines.
7.

You are using the BAT Excel template to define a CSV file for a bulk import. You notice a check box in the template that says "Create Dummy MAC Address." What does this check box accomplish?

  1. It assigns all IP Phones a MAC address of 0000.0000.0000 until the IP Phone auto-registers.
  2. It enters the IP Phones into the CallManager database without a MAC address.
  3. It generates random MAC addresses for the IP Phones until the administrator changes them.
  4. It is for use for updates only with the TAPS utility.
   
8.

You want to perform a bulk update to change the music on hold setting for all Cisco IP Phones to a classic Frank Sinatra song. How do you specify the IP Phones to change in the BAT utility?

  1. by specifying a range of DNs
  2. through a query process
  3. using a drop-down menu
  4. by checking the Select All check box
9.

What additional application does CallManager require to support TAPS?

  1. Microsoft Exchange 2000
  2. Customer Response Application
  3. SQL 2000
  4. additional phone ports
10.

What two methods can you use to create CSV files? (Choose two.)

  1. the Microsoft Excel Template
  2. the CSV file generator downloadable from CCO
  3. the query utility included with BAT
  4. a text editor

Part I: Cisco CallManager Fundamentals

Introduction to Cisco Unified Communications and Cisco Unified CallManager

Cisco Unified CallManager Clustering and Deployment Options

Cisco Unified CallManager Installation and Upgrades

Part II: IPT Devices and Users

Cisco IP Phones and Other User Devices

Configuring Cisco Unified CallManager to Support IP Phones

Cisco IP Telephony Users

Cisco Bulk Administration Tool

Part III: IPT Network Integration and Route Plan

Cisco Catalyst Switches

Configuring Cisco Gateways and Trunks

Cisco Unified CallManager Route Plan Basics

Cisco Unified CallManager Advanced Route Plans

Configuring Hunt Groups and Call Coverage

Implementing Telephony Call Restrictions and Control

Implementing Multiple-Site Deployments

Part IV: VoIP Features

Media Resources

Configuring User Features, Part 1

Configuring User Features, Part 2

Configuring Cisco Unified CallManager Attendant Console

Configuring Cisco IP Manager Assistant

Part V: IPT Security

Securing the Windows Operating System

Securing Cisco Unified CallManager Administration

Preventing Toll Fraud

Hardening the IP Phone

Understanding Cryptographic Fundamentals

Understanding the Public Key Infrastructure

Understanding Cisco IP Telephony Authentication and Encryption Fundamentals

Configuring Cisco IP Telephony Authentication and Encryption

Part VI: IP Video

Introducing IP Video Telephony

Configuring Cisco VT Advantage

Part VII: IPT Management

Introducing Database Tools and Cisco Unified CallManager Serviceability

Monitoring Performance

Configuring Alarms and Traces

Configuring CAR

Using Additional Management and Monitoring Tools

Part VIII: Appendix

Appendix A. Answers to Review Questions

Index



Authorized Self-Study Guide Cisco IP Telephony (CIPT)
Cisco IP Telephony (CIPT) (Authorized Self-Study) (2nd Edition)
ISBN: 158705261X
EAN: 2147483647
Year: 2004
Pages: 329

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net