Deployment Scenarios

Table of contents:

Summary

This chapter covered the different routing protocols supported by Cisco ASA. Configuration examples included information on how to add a static route to configure dynamic routing protocols such as OSPF and RIP. Detailed sample configurations were provided, as well as tips on how to troubleshoot common problems when deploying these dynamic routing protocols.

Cisco ASA also supports IP multicast routing protocols. IGMP versions 1 and 2 are supported, as well as PIM-SM. PIM-SM allows Cisco ASA to have direct participation in the creation of a multicast tree. This technique enhances the multicast support for IGMP forwarding and provides an alternate to multicast transparent mode operations. At the end of the chapter, deployment scenarios were added to enhance the level of learning.

Part I: Product Overview

Introduction to Network Security

Product History

Hardware Overview

Part II: Firewall Solution

Initial Setup and System Maintenance

Network Access Control

IP Routing

Authentication, Authorization, and Accounting (AAA)

Application Inspection

Security Contexts

Transparent Firewalls

Failover and Redundancy

Quality of Service

Part III: Intrusion Prevention System (IPS) Solution

Intrusion Prevention System Integration

Configuring and Troubleshooting Cisco IPS Software via CLI

Part IV: Virtual Private Network (VPN) Solution

Site-to-Site IPSec VPNs

Remote Access VPN

Public Key Infrastructure (PKI)

Part V: Adaptive Security Device Manager

Introduction to ASDM

Firewall Management Using ASDM

IPS Management Using ASDM

VPN Management Using ASDM

Case Studies



Cisco Asa(c) All-in-one Firewall, IPS, And VPN Adaptive Security Appliance
Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security Appliance
ISBN: 1587052091
EAN: 2147483647
Year: 2006
Pages: 231

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net