System Monitoring

Table of contents:

Summary

This chapter introduced the different CLI modes and discussed the initial configuration of the Cisco ASA. It presented a brief overview of the networking technologies, such as IPv6, DHCP, NTP, and SNMP, and provided examples of how to set them up. Telnet and SSH were discussed as the remote-management protocols. This chapter also assisted in system maintenance features such as image upgrade, image, and password recovery methods. The last section discussed the security appliance monitoring capabilities, such as system logging, SNMP, and a set of show commands to check the status and health of the device.

Part I: Product Overview

Introduction to Network Security

Product History

Hardware Overview

Part II: Firewall Solution

Initial Setup and System Maintenance

Network Access Control

IP Routing

Authentication, Authorization, and Accounting (AAA)

Application Inspection

Security Contexts

Transparent Firewalls

Failover and Redundancy

Quality of Service

Part III: Intrusion Prevention System (IPS) Solution

Intrusion Prevention System Integration

Configuring and Troubleshooting Cisco IPS Software via CLI

Part IV: Virtual Private Network (VPN) Solution

Site-to-Site IPSec VPNs

Remote Access VPN

Public Key Infrastructure (PKI)

Part V: Adaptive Security Device Manager

Introduction to ASDM

Firewall Management Using ASDM

IPS Management Using ASDM

VPN Management Using ASDM

Case Studies



Cisco Asa(c) All-in-one Firewall, IPS, And VPN Adaptive Security Appliance
Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security Appliance
ISBN: 1587052091
EAN: 2147483647
Year: 2006
Pages: 231

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net