This chapter covered the different routing protocols supported by Cisco ASA. Configuration examples included information on how to add a static route to configure dynamic routing protocols such as OSPF and RIP. Detailed sample configurations were provided, as well as tips on how to troubleshoot common problems when deploying these dynamic routing protocols.
Cisco ASA also supports IP multicast routing protocols. IGMP versions 1 and 2 are supported, as well as PIM-SM. PIM-SM allows Cisco ASA to have direct participation in the creation of a multicast tree. This technique enhances the multicast support for IGMP forwarding and provides an alternate to multicast transparent mode operations. At the end of the chapter, deployment scenarios were added to enhance the level of learning.
Part I: Product Overview
Introduction to Network Security
Product History
Hardware Overview
Part II: Firewall Solution
Initial Setup and System Maintenance
Network Access Control
IP Routing
Authentication, Authorization, and Accounting (AAA)
Application Inspection
Security Contexts
Transparent Firewalls
Failover and Redundancy
Quality of Service
Part III: Intrusion Prevention System (IPS) Solution
Intrusion Prevention System Integration
Configuring and Troubleshooting Cisco IPS Software via CLI
Part IV: Virtual Private Network (VPN) Solution
Site-to-Site IPSec VPNs
Remote Access VPN
Public Key Infrastructure (PKI)
Part V: Adaptive Security Device Manager
Introduction to ASDM
Firewall Management Using ASDM
IPS Management Using ASDM
VPN Management Using ASDM
Case Studies