Using the remote-access methods available with Cisco ASA, security administrators can deploy Cisco ASA into almost any network topology. The Cisco IPSec VPN solution is available if users want to access the entire secured network. On the other hand, WebVPN provides application-based connectivity from the SSL-enabled browsers. To reinforce learning, many different deployment scenarios were discussed along with their configurations. This chapter covered extensive show and debug commands to assist in troubleshooting complicated Remote Access VPN and WebVPN deployments.
Part I: Product Overview
Introduction to Network Security
Product History
Hardware Overview
Part II: Firewall Solution
Initial Setup and System Maintenance
Network Access Control
IP Routing
Authentication, Authorization, and Accounting (AAA)
Application Inspection
Security Contexts
Transparent Firewalls
Failover and Redundancy
Quality of Service
Part III: Intrusion Prevention System (IPS) Solution
Intrusion Prevention System Integration
Configuring and Troubleshooting Cisco IPS Software via CLI
Part IV: Virtual Private Network (VPN) Solution
Site-to-Site IPSec VPNs
Remote Access VPN
Public Key Infrastructure (PKI)
Part V: Adaptive Security Device Manager
Introduction to ASDM
Firewall Management Using ASDM
IPS Management Using ASDM
VPN Management Using ASDM
Case Studies