Configuring MGCP Gateway Fallback

You configure MGCP Gateway Fallback using the ccm-manager fallback-mgcp command. You also specify that the default application should take over for the MGCP-controlled voice ports. The configuration for setting this application varies depending on the Cisco IOS version. Example 13-17 illustrates the methods of setting the application when in MGCP Gateway Fallback mode.

Example 13-17. Configuring MGCP Gateway Fallback Alternate Application

Miami(config)#ccm-manager fallback-mgcp
!
! PRE-12.3(14)T alternate application configuration
!
Miami(config)#call application alternate default
!
! 12.3(14)T & later alternate application configuration
!
Miami(config)#application
Miami(config-app)#global
Miami(config-app-global)#service alternate default
 


Part I: Voice Gateways and Gatekeepers

Gateways and Gatekeepers

Part II: Gateways

Media Gateway Control Protocol

H.323

Session Initiation Protocol

Circuit Options

Connecting to the PSTN

Connecting to PBXs

Connecting to an IP WAN

Dial Plans

Digit Manipulation

Influencing Path Selection

Configuring Class of Restrictions

SRST and MGCP Gateway Fallback

DSP Resources

Using Tcl Scripts and VoiceXML

Part III: Gatekeepers

Deploying Gatekeepers

Gatekeeper Configuration

Part IV: IP-to-IP Gateways

Cisco Multiservice IP-to-IP Gateway

Appendix A. Answers to Chapter-Ending Review Questions

Index



Cisco Voice Gateways and Gatekeepers
Cisco Voice Gateways and Gatekeepers
ISBN: 158705258X
EAN: 2147483647
Year: 2004
Pages: 218

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net