Configuring an ISO Address on an Interface

Problem

You want to configure an interface to support IS-IS.

Solution

Configure the ISO protocol family on the interface running IS-IS:

	[edit]
	aviva@RouterA# set interfaces fe-0/0/0 unit 0 family iso

 

Discussion

IS-IS is an OSI protocol, so you need to create an OSI family on the interface for IS-IS to work. You also need to configure one or more addresses for the loopback interface, which IS-IS uses for its interface addresses (see Recipe 7.3). Here's how to check the configuration:

	aviva@router1# show interfaces fe-0/0/0.0 brief
	 Logical interface fe-0/0/0.0
	 Flags: SNMP-Traps Encapsulation: ENET2
	 inet 192.168.220.1/30
	 iso

 

See Also

Recipes 7.3, 7.12, and 11.1


Router Configuration and File Management

Basic Router Security and Access Control

IPSec

SNMP

Logging

NTP

Router Interfaces

IP Routing

Routing Policy and Firewall Filters

RIP

IS-IS

OSPF

BGP

MPLS

VPNs

IP Multicast



JUNOS Cookbook
Junos Cookbook (Cookbooks (OReilly))
ISBN: 0596100140
EAN: 2147483647
Year: 2007
Pages: 290
Authors: Aviva Garrett

Similar book on Amazon

Flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net