Limiting the Messages Collected

Problem

You have turned on system logging and are collecting messages from all facilities in your logging files. You are not interested in the messages from one or two of the facilities and would like to stop messages from these facilities without configuring each priority.

Solution

Disable the facilities that you don't want showing up in your logfile:

	[edit system syslog file messages ]
	aviva@router1# set 
any notice 
	aviva@router1# set interactive none 

 

Discussion

When you want to capture logging messages from all sources on the router, you can configure this easily with a single command that specifies the facility as any. When you want to capture all facilities but one or two, the quickest way is to disable the facilities that you are not interested in. In this case, you are not interested in collecting any of the commands that users type at the CLI, but you do want any other commands. These two commands are a shortcut that saves you from having to type 10 commands, one for each facility you want to enable.


Router Configuration and File Management

Basic Router Security and Access Control

IPSec

SNMP

Logging

NTP

Router Interfaces

IP Routing

Routing Policy and Firewall Filters

RIP

IS-IS

OSPF

BGP

MPLS

VPNs

IP Multicast



JUNOS Cookbook
Junos Cookbook (Cookbooks (OReilly))
ISBN: 0596100140
EAN: 2147483647
Year: 2007
Pages: 290
Authors: Aviva Garrett

Similar book on Amazon

Flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net