CCIE Practical Studies, Volume I - page 1
- CCIE Practical Studies, Volume I
- CCIE Practical Studies, Volume I
- Table of Contents
- Copyright
- About the Authors
- Contributing Authors
- Acknowledgments
- Foreword
- Introduction
- Goals
- Who Should Read This Book?
- How This Book Is Organized
- Icons Used in This Book
- Command Syntax Conventions
- Part I: Modeling the Internetwork
- Chapter 1. The Key Components for Modeling an Internetwork
- Identifying the Key Components Needed for Modeling Internetworks
- The Access Server
- Modeling Local-Area Networks (LANs)
- Simulating Wide-Area Network Connections
- Routers, Cisco IOS Software, and Memory Requirements for Labs
- Test Hosts and Data Simulation
- Building the Framework for Internetwork Modeling-Configuring Key Components
- Practical Study for Chapter 1: Setting Up
- Lab 1: Password Recovery-Part I
- Lab 1: Password Recovery-Part II
- Lab 2: Password Recovery on a Catalyst 5500-Part I
- Lab 2: Password Recovery on a Catalyst 5500-Part II
- Lab 3: Upgrading the IOS and Restoring a Configuration from TFTP Server-Part I
- Lab 3: Upgrading the IOS and Restoring a Configuration from a TFTP Server-Part II
- Lab 4: Configuring an Access Server-Part I
- Lab 4: Configuring an Access Server-Part II
- Lab 5: Configuring a Frame Relay Switch-Part I
- Lab 5: Configuring a Frame Relay Switch-Part II
- Lab 6: Configuring Remote Access to the Lab-Part I
- Lab 6: Configuring Remote Access to the Lab-Part II
- Part II: Modeling LANs
- Chapter 2. LAN Protocols: Configuring Catalyst Ethernet and Token Ring Switches
- Ethernet LANs
- Ethernet: A Brief History of an Evolutionary Protocol
- Ethernet Technical Overview
- 802.1d Spanning-Tree Protocol (STP)
- Ethernet Switching
- IEEE 802.5Token Ring LANs
- Token Ring: 30 Years Old and Still in Service
- Token Ring Technical Overview
- Token Ring Switching
- Token Ring Bridge Relay Function (TrBRF) and the Token Ring Concentrator Function (TrCRF)
- Configuring Token Ring Switching on the Catalyst 3920
- More Practice: EthernetToken Ring Labs
- Lab 7: Ethernet Switching, VLAN Trunking, and Spanning Tree Root Placement-Part I
- Lab 7: Ethernet Switching, VLAN Trunking, and Spanning Tree Root Placement-Part II
- Lab 8: Configuring Token Ring Switching Using the Catalyst 3920-Part I
- Lab 8: Configuring Token Ring Switching Using the Catalyst 3920-Part II
- Part III: Connecting LANs with Wide-Area Networks (WANs)
- Chapter 3. WAN Protocols and Technologies: High-Level Data Link Control (HDLC)
- The Compatibility and Simplicity of HDLC
- Chapter 4. WAN Protocols and Technologies: Point-to-Point Protocol (PPP)
- The Many Uses of PPP
- Chapter 5. WAN Protocols and Technologies: Frame Relay
- Frame Relay Terminology
- Frame Relay Technical Overview
- Configuring Frame Relay
- The Big show and Big D for Frame Relay
- Additional Commands for Configuring Frame Relay
- Configuring Frame Relay Traffic Shaping
- Lab 13: Configuring Frame Relay Networks and Controlling Frame Relay ARP-Part I
- Lab 13: Configuring Frame Relay Networks and Controlling Frame Relay ARP-Part II
- Lab 14: Configuring Frame Relay Networks, Traffic Shaping, OSPF, DLSwLLC2-Part I
- Lab 14: Configuring Frame Relay Networks, Traffic Shaping, OSPF, DLSwLLC2-Part II
- Chapter 6. WAN Protocols and Technologies: Voice over X
- Introduction to Analog Telephony
- Digital Voice Technology
- Cisco Voice Products
- Lab 15: Configuring Voice over Frame, Voice over IP, and Voice over ATM
- Lab 15a: Configuring Voice over Frame Relay-Part I
- Lab 15a: Configuring Voice over Frame Relay-Part II
- Lab 15b: Configuring Voice over IP-Part I
- Lab 15b: Configuring Voice over IP-Part II
- Lab 15c: Configuring Voice over ATM-Part I
