Digital Voice Technology

Additional Commands for Configuring Frame Relay

Some additional commands are available to control or modify your Frame Relay network. The following list includes some of the more commonly tuned features of Frame Relay. For a complete list, see the IOS WAN Configuration Guide .

• Router(config-if)no frame-relay inverse-arp ” Disables the sending of Inverse ARP requests . Use this command in conjunction with no arp frame-relay to prevent the dynamic mapping of PVCs.

• Router(config-if)no arp frame-relay ” Disables ARP responses. Use this in conjunction with the no frame-relay inverse-arp command.

• Router(config-if)keepalive keepalive_interval_in_seconds ” Sets the default 10-second keepalive interval to another value. Be sure to use this command on both sides of the link.

• clear frame-relay- inarp ” Use this command to clear any dynamically created Frame Relay maps.

• frame-relay priority-dlci- group group-number high-dlci medium-dlci normal-dlci low-dlci ” Use this command to use multiple parallel DLCIs for different Frame Relay traffic types.