Command |
Description |
---|---|
Router(config-router)# neighbor ip-address send-label |
Enables a BGP router to send MPLS labels with BGP routes to a neighboring BGP router. This command is configured in router configuration mode. |
Router(config-route-map)# set mpls-label |
Can be used only with the neighbor route-map out command to manage outbound route maps for a BGP session. Use the route-map global configuration command with match and set route-map configuration commands to define the conditions for redistributing routes from one routing protocol into another. |
Router(config-route-map)# match mpls-label |
Use this command in a route-map to select those routes that carry match labels. |
MPLS Overview
Basic MPLS Configuration
Basic MPLS VPN Overview and Configuration
PE-CE Routing Protocol-Static and RIP
PE-CE Routing Protocol-OSPF and EIGRP
Implementing BGP in MPLS VPNs
Inter-Provider VPNs
Carrier Supporting Carriers
MPLS Traffic Engineering
Implementing VPNs with Layer 2 Tunneling Protocol Version 3
Any Transport over MPLS (AToM)
Virtual Private LAN Service (VPLS)
Implementing Quality of Service in MPLS Networks
MPLS Features and Case Studies