Cisco OSPF Command and Configuration Handbook (paperback) - page 1
- Cisco OSPF Command and Configuration Handbook (CCIE Professional Development)
- Cisco OSPF Command and Configuration Handbook (CCIE Professional Development)
- Cisco OSPF Command and Configuration Handbook (CCIE Professional Development)
- Copyright
- About the Author
- About the Technical Reviewers
- Acknowledgments
- Introduction
- Recommended Reading
- Icons Used in This Book
- Command Syntax Conventions
- Chapter 1. OSPF Process Configuration Commands
- 1-1 router ospf process-id
- 1-2 router ospf process-id vrf name
- Chapter 2. OSPF Area Commands
- 2-1 area area-id authentication
- 2-2 area area-id authentication message-digest
- 2-3 area area-id default-cost cost
- 2-4 area area-id nssa
- 2-5 area area-id nssa default-information-originate
- 2-6 area area-id nssa no-redistribution
- 2-7 area area-id nssa no-summary
- 2-8 area area-id range ip-address mask
- 2-9 area area-id range ip-address mask advertise
- 2-10 area area-id range ip-address mask not-advertise
- 2-11 area area-id stub
- 2-12 area area-id stub no-summary
- 2-13 area transit-area-id virtual-link router-id
- 2-14 area transit-area-id virtual-link router-id authentication authentication-key password
- 2-15 area transit-area-id virtual-link router-id authentication message-digest
- 2-16 area transit-area-id virtual-link router-id authentication null
- 2-17 area transit-area-id virtual-link router-id authentication-key password
- 2-18 area transit-area-id virtual-link router-id dead-interval seconds
- 2-19 area transit-area-id virtual-link router-id hi-interval seconds
- 2-20 area transit-area-id virtual-link router-id message-digest-key key-id md5 password
- 2-21 area transit-area-id virtual-link router-id retransmit-interval seconds
- 2-22 area transit-area-id virtual-link router-id transmit-delay seconds
- Chapter 3. Auto Cost
- 3-1 auto-cost reference-bandwidth bandwidth
- Troubleshooting
- Chapter 4. Default Route Generation
- 4-1 default-information originate
- 4-2 default-information originate always
- 4-3 default-information originate metric cost
- 4-4 default-information originate always metric cost
- 4-5 default-information originate metric-type type
- 4-6 default-information originate always metric-type type
- 4-7 default-information originate route-map route-map-name
- Chapter 5. Setting the Default Metric for Redistributed Protocols
- 5-1 default-metric cost
- Chapter 6. Administrative Distance
- 6-1 distance administrative-distance
- 6-2 distance administrative-distance source-ip-address source-ip-mask
- 6-3 distance administrative-distance source-ip-address source-ip-mask access-list-number
- 6-4 distance ospf external administrative-distance
- 6-5 distance ospf inter-area administrative-distance
- 6-6 distance ospf intra-area administrative-distance
- Chapter 7. Filtering Routes with Distribute Lists
- 7-1 distribute-list access-list-number in
- 7-2 distribute-list access-list-number in interface-type interface-number
- 7-3 distribute-list access-list-number out
- 7-4 distribute-list access-list-number out interface-type interface-number
- 7-5 distribute-list access-list-number out routing-process
- 7-6 distribute-list access-list-name in
- 7-7 distribute-list access-list-name in interface-type interface-number
- 7-8 distribute-list access-list-name out
- 7-9 distribute-list access-list-name out interface-type interface-number
- 7-10 distribute-list access-list-name out routing-process
- 7-11 distribute-list prefix prefix-list-name in
- 7-12 distribute-list prefix prefix-list-name in interface-type interface-number
- 7-13 distribute-list prefix prefix-list-name out
- 7-14 distribute-list prefix prefix-list-name out interface-type interface-number
- 7-15 distribute-list prefix prefix-list-name out routing-process
- Chapter 8. Handling of MOSPF LSAs
- 8-1 ignore lsa mospf
- Chapter 9. Logging OSPF Neighbor Changes
- 9-1 log-adjacency-changes
- 9-2 log adjacency-changes detail
- Chapter 10. Multiple Path Configuration
- 10-1 maximum-paths number-of-paths
