20-30 show ip ospf process-id flood-list int-name int-number

20-30 show ip ospf process-id flood-list int- name int-number

Syntax Description:

• process-id ” The OSPF process ID. The range of values is 1 to 4,294,967,295.

• int-name ” Interface name.

• int-number ” Interface number.

Purpose: To display LSAs that are queued for flooding. An OSPF process ID can be used if more than one OSPF process is active using the form show ip ospf process-id flood-list. The output of this command can be filtered, using regular expressions, by one of the following forms:

  show ip ospf flood-list   begin   regular-expression   show ip ospf flood-list   exclude   regular-expression   show ip ospf flood-list   include   regular-expression  

Initial Cisco IOS Software Release: 12.0 (1)T

Example: Displaying All OSPF Floodlist Information

The following is a representative output from the show ip ospf flood-list EXEC command.

 r4#  show ip ospf flood-list  OSPF Router with ID (4.4.4.4) (Process ID 1)  Interface Serial0/0, Queue length 0  Interface Ethernet1/0, Queue length 0  Interface Ethernet0/0, Queue length 0  Interface Loopback0, Queue length 0