< Free Open Study > |
20-58 show ip ospf process-id retransmission int- name int-numberSyntax Description:
Purpose: To display a list of LSAs waiting to be re-sent. An OSPF process ID can be used if more than one OSPF process is active using the form show ip ospf process-id retransmission-list. The output of this command can be filtered, using regular expressions, by one of the following forms: show ip ospf retransmission-list begin regular-expression show ip ospf retransmission-list exclude regular-expression show ip ospf retransmission-list include regular-expression Initial Cisco IOS Software Release: 10.2 Example: Displaying the List of LSAs Waiting to Be Re-sent on a Particular InterfaceThe following is a representative output from the show ip ospf retransmission-list EXEC command. r2# show ip ospf retransmission-list serial 0/0 OSPF Router with ID (2.2.2.2) (Process ID 1) Neighbor 1.1.1.1, interface Serial0/0 address 10.1.1.1 Link state retransmission due in 2969 msec, Queue length 2 Type LS ID ADV RTR Seq NO Age Checksum 1 2.2.2.2 2.2.2.2 0x80000219 0 0xB123 |
< Free Open Study > |