Adding a Reverse Master Zone | Official Red Hat Linux Administrators Guide

To add a reverse master zone, click the Add button and select Reverse Master Zone. Enter the first three octets of the IP address range that you want to configure. For example, if you are configuring the IP address range 192.168.10.0/255.255.255.0, enter 192.168.10 in the IP Address (first 3 Octets) text area. A new window will appear, as shown in Figure 16-3, with the following options:

IP Address — The first three octets that you just entered in the previous window.
Reverse IP Address — Non-editable. Pre-populated based on the IP Address entered.
Contact — Email address of the main contact for the master zone.
File Name — File name of DNS database file in the /var/named directory.
Primary Nameserver (SOA) — State of authority (SOA) record. This specifies the nameserver that is the best resource of information for this domain.
Serial Number — The serial number of the DNS database file. This number must be incremented each time the file is changed, so that the slave nameservers for the zone will retrieve the latest data. The BIND Configuration Tool increments this number each time the configuration changes. It can also be incremented manually by clicking the Set button next to the Serial Number value.
Time Settings — The Refresh, Retry, Expire, and Minimum TTL (Time to Live) values that are stored in the DNS database file.
Nameservers — Add, edit, and delete name servers for the reverse master zone. At least one nameserver is required.
Reverse Address Table — List of IP addresses within the reverse master zone and their hostnames. For example, for the reverse master zone 192.168.10, you can add 192.168.10.1 in the Reverse Address Table with the hostname one.example.com. — the hostname must end with a period (.) to specify that it is a full hostname.

The configuration shown in Figure 16-3 creates the following entry in /etc/named.conf:

zone       "10.168.192.in-addr.arpa" {              type master;              file    "10.168.192.in-addr.arpa.zone"; };

click to expand
Figure 16-3: Adding a slave zone

It also creates the file /var/named/10.168.192.in-addr.arpa.zone with the following information:

$TTL 86400 @            IN       SOA     ns.example.com. root.localhost > 2 ; serial                               28800 ; refresh                               7200 ; retry                               604800 ; expire                               86400 ; ttk                               ) @            IN       NS      ns2.example.com. 1            IN       PTR     one.example.com. 2            IN       PTR     two.example.com.

After configuring the reverse master zone, click OK to return to the main window, as shown in Figure 16-1. From the pull-down menu, choose File > Apply to write the /etc/named.conf configuration file, write all the individual zone files in the /var/named directory, and have the daemon reload the configuration files.