Chassis


These commands obtain information from the chassis software process, which runs when the router is up and running. If the SCB, SSB, SFM, or FEB is not running, no information about chassis components is available through the CLI.

Table 13.3. Chassis Monitoring Commands
Information to Monitor Command Example
Chassis alarm status show chassis alarms
 user@host>  show chassis alarms  3 alarms are currently active Alarm time Class Description 2000-02-07 10:12:22 UTC Major fxp0: ethernet link down 2000-02-07 10:11:54 UTC Minor YELLOW ALARM - PEM 1 Removed 2000-02-07 10:11:03 UTC Minor YELLOW ALARM - Lower Fan Tray Removed 
Chassis clock-source configuration request chassis pcg
 user@host>  request chassis pcg slot offline  
Information currently on the craft display show chassis craft-interface
 user@sheep>  show chassis craft-interface  Red alarm:     LED off, relay off Yellow alarm:  LED on, relay on Host OK LED:   On Host fail LED: Off FPCs     0  1  2  3 ------------------- Green    .  *  *  . Red      .  .  .  . LCD screen:\LCD Screen:      +--------------------+      sheep                     1 Alarm active            Y: FERF                                             +--------------------+ 
Environmental information show chassis environment
 user@m5-host>  show chassis environment  Class Item                   Status     Measurement Power Power Supply A         OK       Power Supply B         OK Temp  FPC Slot 0             OK         32 degrees C / 89 degrees F       FEB                    OK         31 degrees C / 87 degrees F       PS Intake              OK         26 degrees C / 78 degrees F       PS Exhaust             OK         31 degrees C / 87 degrees F Fans  Left Fan 1             OK         Spinning at normal speed       Left Fan 2             OK         Spinning at normal speed       Left Fan 3             OK         Spinning at normal speed       Left Fan 4             OK         Spinning at normal speed Misc  Craft Interface        OK 
Firmware version show chassis firmware
 user@m40-host>  show chassis firmware  Part                     Type       Version System control board     ROM        Juniper ROM Monitor Version 2.0i126Copyri                          O/S        Version 2.0i1 by root on Thu Jul 23 00:51 FPC 5                    ROM        Juniper ROM Monitor Version 2.0i49Copyrig                          O/S        Version 2.0i1 by root on Thu Jul 23 00:59 
FPC and PIC status show chassis fpc
 user@m20-host>  show chassis fpc  FPC status:                Temp  CPU Utilization (%)   Memory    Utilization (%) Slot State      (C)  Total  Interrupt      DRAM (MB) Heap     Buffer    0  Empty        0      0          0         0         0          0   1  Online      38      0          0         8         0          4   2  Online      35      0          0         8         0          3   3  Empty        0      0          0         0         0          0 
Control FPC operation. request chassis fpc
 user@m40ehost> request chassis fpc slot 0 offline 
Control PIC operation. request chassis pic
 user@m20host> request chassis pic 0 4 offline 
Hardware inventory show chassis hardware
 user@m10-host>  show chassis hardware  Hardware inventory: Item             Version  Part number  Serial number     Description Chassis                                1122              M10 Midplane         REV 1.1  710-001950   S/N AC6626 Power supply A   Rev 01   740-002497   S/N LC36095       AC Power supply B   Rev 01   740-002497   S/N LC36100       AC Display          REV 1.2  710-001995   S/N AC6656 Host                                   18000005dfb3fb01  teknor FEB              REV 01   710-001948   S/N AC6632        Internet Processor II FPC 0   PIC 0          REV 08   750-001072   S/N AB2485        1x G/E, 1000 BASE-SX   PIC 1          REV 01   750-000613   S/N AA1048        1x OC-12 SONET, SMIR FPC 1 
MAC address show chassis mac-addresses
 user@host>  show chassis mac-addresses  MAC address information   Public base address     0:90:69:0:4:0   Public count            1008   Private base address    0:90:69:0:7:f0   Private count           16 
Routing Engine information show chassis routing-engine
 user@m10-host>  show chassis routing-engine  Routing Engine status:     Temperature                 29 degrees C / 84 degrees F     DRAM                       768 Mbytes     CPU utilization:       User                       0 percent       Background                 0 percent       Kernel                     0 percent       Interrupt                  0 percent       Idle                     100 percent     Start time                     2000-08-23 19:53:31 PDT     Uptime                         4 days, 21 hours, 53 minutes, 38 seconds     Load averages:                 1 minute   5 minute  15 minute                                        0.12       0.03       0.01 
Control the Routing Engine. request chassis routing-engine master
 user@M20-host>  request chassis routing-engine master acquire  warning: Traffic will be interrupted while the PFE is re- initialized warning: The other routing engine's file system could be corrupted Reset other routing engine and become master ? [yes,no] (no) root@m20-host-0>  request chassis routing-engine master switch  warning: Traffic will be interrupted while the PFE is re- initialized Toggle mastership between Routing Engines ? [yes,no] (no) yes Resolving mastership... Complete. The other Routing Engine becomes the master. root@m20-host-0> 
System board information show chassis feb

show chassis scb

show chassis sfm

show chassis ssb

 user@m160-host>  show chassis sfm  SFM status:                Temp  CPU Utilization (%)   Memory    Utilization (%) Slot State      (C)  Total  Interrupt      DRAM (MB) Heap     Buffer   0  Online      39      0          0        64         0          6   1  Online      43      0          0        64         0          6   2  Empty        0      0          0         0         0          0   3  Empty        0      0          0         0         0          0 
Control SFM operation. request chassis sfm
 user@host>  request chassis sfm slot 7 offline  
Control SFM and SSB mastership. request chassis sfm master switch request chassis ssb master switch
 user@host>  request chassis sfm master switch  warning: Traffic will be interrupted while the PFE is re- initialized Toggle mastership between system forwarding module? [yes,no] (no) yes Switch initiated, use "show chassis sfm" to verify 
Display a message on the router's craft interface. set chassis display message
 user@sheep>  set chassis display message   "   NOC contact Dusty (888)   526-1234   "  message sent user@sheep>  show chassis craft-interface  Red alarm:     LED off, relay off Yellow alarm:  LED off, relay off Host OK LED:   On Host fail LED: Off FPCs     0  1  2  3  4  5  6  7 ------------------------------- Green    .  .  *  .  .  *  *  . Red      .  .  .  .  .  .  .  . LCD screen:      +--------------------+      NOC contact Dusty         (888) 526-1234                                                                +--------------------+ 


Juniper Networks Field Guide and Reference
Juniper Networks Field Guide and Reference
ISBN: 0321122445
EAN: 2147483647
Year: 2002
Pages: 185

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net