Chapter Two Test

---

The answers to this chapter test are located in Appendix A, "Answers to Chapter Tests."

1. Consider the following situations and note whether the filter should be based on MAC address, IP address or IPX address.

   1. You want to see all the traffic sent to or from the local router.

      ____ MAC____ IP____ IPX

   2. You are troubleshooting a DNS problem on the local network.

      ____ MAC____ IP____ IPX

   3. You want to catch all web browsing traffic to or from Fred.

      ____ MAC____ IP____ IPX

   4. You want to perform an analysis of one client's bootup process.

      ____ MAC____ IP____ IPX

   5. You are interested in all broadcast traffic on the network.

      ____ MAC____ IP____ IPX

2. Which offset and value should you use when you build a filter on the source address 10.0.2.5?

   Offset: __________Value: __________ (in hex)

3. Fill in the following filter window to build a filter for all traffic from subnet 10.16.2.0.

4. Write down some of the devices on your network that you need filters for. Indicate whether you will build these filters based on MAC address, IP address, IPX address or another type of address.

   Filter Type Device Name

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

   ____________________________________________

5. Refer to IANA's protocol numbers area to answer the following questions regarding address filters:

   1. What filter value (in decimal) will you use to capture all multicast traffic sent to RIP2 routers?

      ___________________________

   2. What filter value (in decimal) will you use to capture all multicast traffic sent to all OSPF routers?

      ___________________________

   3. What filter value will you use to capture almost all IP multicast traffic?

      ___________________________

---