Page #202 (Creating Pipeline, Valve, and Other Reports)

Converting Shapes and CAD Symbols into Components

Process engineering shapes don't work like other Visio 2007 shapes. They have categories, tag formats, and other attributes that make your diagram more valuable. However, you might need to create your own shapes or modify existing Visio 2007 shapes to complete your diagram. To take full advantage of Visio 2007 you can convert other Visio 2007 shapes or even CAD symbols (from an AutoCAD .dwg or .dxf file) to process engineering shapes so that they will appear in your model. The Shape Conversion command on the Process Engineering menu applies the necessary component information to any shape or symbol, as Figure 27-30 shows.

Figure 27-30: You can convert shapes from other sources, including AutoCAD files, into process engineering components with the Shape Conversion command.

The results of the conversion vary depending on the source of the shapes:

• Shapes on the drawing page If you convert selected shapes on the page, Visio 2007 applies a category, shape data, and tags to each shape so that it appears in the appropriate model windows. Each shape links to a new master on the document stencil.

• Shapes from a stencil If you convert an existing stencil, all the master shapes are updated with a category, shape data, and tags. When you drag a converted shape from the stencil onto the drawing page, it appears in all the appropriate model windows.

• Shapes from an AutoCAD file If you convert the symbols from a .dwg or .dxf file, Visio 2007 creates a new stencil and adds a master shape for each converted symbol with the appropriate category, shape data, and tag information. To save the new stencil, click its title bar, and then choose File, Save.

To convert shapes into process engineering shapes, follow these steps:

1. If you're converting individual shapes on the drawing page, select the shapes.

2. Choose Process Engineering, Shape Conversion.

3. Under Source, select one of the following:

   • If you're converting shapes on the Visio 2007 drawing page, choose the Selected Shapes option.

   • If you're converting shapes on a Visio 2007 stencil, choose the Shapes In A Visio Stencil option, and then click Choose Shapes. Select the stencil, select the shapes you want to convert, and then click OK.

     Note 

     To convert the shapes on the current diagram's document stencil-that is, all the shapes based on master shapes that you've added to a diagram-in the Choose Shapes dialog box, select the name of the document in the Documents list.

   • If you're converting AutoCAD symbols, choose the Symbols In A CAD File option. Type the name and path of the CAD file in the Filename box, or click Browse to locate an AutoCAD file. In the One CAD Unit boxes, indicate the units of measure that you want to use. This setting establishes the drawing scale in Visio 2007.

4. In the Category list, select a category for the converted shapes.

5. In the Tag Format list, select the tag format to use in labeling the converted shapes.

6. Click OK to start the conversion. Visio 2007 converts the shape on the drawing page or on a stencil. If you converted CAD symbols, they are added as a new stencil of master shapes.

Note 

If you convert a stencil or CAD symbols, make sure to save the changes to the master shapes on the stencil. To do this, right-click a stencil title bar, and then choose Save or Save As.

Troubleshooting 

An equipment shape in a P&ID or PFD no longer works-its tag and other information have been deleted

Some operations in Visio 2007 can cause a process engineering shape to lose its data-tracking attributes, and you must use the Shape Conversion command to reapply the lost functionality. For example, if you ungroup a grouped shape, or use a shape operation command (choose Shape, Operations) with process engineering shapes, Visio 2007 discards the shape's shape data, tag, and category information. You can reapply the information by converting the shape.