Configuring and Troubleshooting Cisco IPS Software via CLI

This chapter covers the following topics:

  • Cisco IPS software architecture
  • Introduction to the CIPS 5.x command-line interface (CLI)
  • User administration
  • AIP-SSM maintenance
  • Advanced features and configuration

The integration of Cisco Intrusion Prevention Software (IPS) into Cisco ASA enables you to effectively detect and react to security threats. In this chapter, you will learn the Cisco IPS software architecture, how to configure and monitor the Adaptive Inspection and Prevention Security Services Module (AIP-SSM), and several troubleshooting techniques.

Part I: Product Overview

Introduction to Network Security

Product History

Hardware Overview

Part II: Firewall Solution

Initial Setup and System Maintenance

Network Access Control

IP Routing

Authentication, Authorization, and Accounting (AAA)

Application Inspection

Security Contexts

Transparent Firewalls

Failover and Redundancy

Quality of Service

Part III: Intrusion Prevention System (IPS) Solution

Intrusion Prevention System Integration

Configuring and Troubleshooting Cisco IPS Software via CLI

Part IV: Virtual Private Network (VPN) Solution

Site-to-Site IPSec VPNs

Remote Access VPN

Public Key Infrastructure (PKI)

Part V: Adaptive Security Device Manager

Introduction to ASDM

Firewall Management Using ASDM

IPS Management Using ASDM

VPN Management Using ASDM

Case Studies



Cisco Asa(c) All-in-one Firewall, IPS, And VPN Adaptive Security Appliance
Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security Appliance
ISBN: 1587052091
EAN: 2147483647
Year: 2006
Pages: 231

Flylib.com © 2008-2020.
If you may any questions please contact us: flylib@qtcs.net