CCNA Practical Studies (Cisco Certification & Training) - page 1
- 1
- 2
- CCNA Practical Studies
- CCNA Practical Studies
- Table Of Contents
- About the Authors
- About the Technical Reviewers
- Acknowledgments
- Foreword. (cisco certified professional)
- Copyright
- Introduction
- Audience
- CCNA Exam 640-607 and Performance-Based Testing
- Chapter Organization
- How Best to Use This Book
- Getting Equipment
- How to Use The Book If You Cannot Get Equipment
- Command Syntax Conventions
- Part I: Basic Router Configuration
- Chapter 1. Practical Lab Methodology and Equipment
- OSI Reference Model
- Lab Equipment
- Chapter 2. Cisco Router Review
- Example 2-1 Context-Sensitive Help from User EXEC Mode
- Summary
- Chapter 3. Lab Environment
- Lab Inventory and Physical Connections
- Lab Objectives
- Recommendations and Methodology
- Summary
- Chapter 4. Gaining Access to the Routers and Switches
- Direct Access to Routers and Switches Through a Console Port
- Example 4-1 Entering Enable Mode on Terminal Server
- Example 4-10 Creating loopback 0 and Assigning It an IP Address
- Summary
- Chapter 5. Bridging and Switching
- Transparent Bridging
- Switching
- Virtual LANs
- Example 5-1 Gaining Access to the Catalyst Switch
- Chapter 6. General Router Configurations
- Lab Objectives
- Example 6-1 Configuring a Host Name on Each Lab Router and Saving the Configuration
- Example 6-2 Setting the Enable, Console, and vty Passwords on R1
- Example 6-3 Configuring a Message of the Day (MOTD) Banner on R1
- Example 6-5 Router Doing a Name Lookup on a Mistyped Command
- Example 6-8 Disabling
- Example 6-12 Configuring and IP Host Table Mapping the Router Name to Its Loopback IP Address
- Example 6-15 Entering Enable Mode in Preparation to Paste Script
- Chapter 7. Router Interface Configuration Methodology
- Interface Connectivity and IP Addressing
- Frame Relay Overview
- Example 7-1 Gaining Access to R3
- Example 7-26 R5 Serial Configuration
- Example 7-34 R1 Ethernet Configuration
- Example 7-40 R5 Token Ring Interface Configuration
- Example 7-42 R6 Loopback Interfaces Configuration
- Example 7-44
- Part II: Configuring Routing Protocols, ISDN, and IPX
- Chapter 8. Routing Information Protocol (RIP)
- RIP Fundamentals
- Example 8-1 IP Routing Table on R1 Before the Configuration of IP RIP
- Chapter 9. Interior Gateway Routing Protocol (IGRP)
- IGRP Fundamentals
- Example 9-1 IGRP Configuration on R3
- Chapter 10. Enhanced Interior Gateway Protocol (EIGRP)
- EIGRP Fundamentals
- Example 10-1 Configuring EIGRP on R2 and Placing S0 into EIGRP Autonomous System 100
- Summary
- Chapter 11. Route Redistribution
- Fundamentals of Route Redistribution
- Example 11-1 Router Routing Table
- Chapter 12. Integrated Services Digital Network (ISDN)
- ISDN Fundamentals
- Example 12-1 Context-Sensitive Help Displays the Available ISDN Switch Types
- Chapter 13. IPX
- Fundamentals of the IPX Protocol
- IPX Lab Objectives
- Example 13-1 Enabling IPX on R1
- Chapter 14. Routing IPX
- IPX Routing Fundamentals
- Routing IPX Lab Objectives
- 1
- 2
Similar products
Interconnecting Cisco Network Devices, Part 1 (ICND1): CCNA Exam 640-802 and ICND1 Exam 640-822 (2nd Edition)
Interconnecting Cisco Network Devices, Part 2 (ICND2): (CCNA Exam 640-802 and ICND exam 640-816) (3rd Edition)
CCNP Practical Studies: Routing
CCNP Practical Studies: Troubleshooting (CCNP Self-Study)