20-52 show ip ospf process-id request-list int-name int-number

20-52 show ip ospf process-id request-list int- name int-number

Syntax Description:

• process-id ” The OSPF process ID. The range of values is 1 to 4,294,967,295.

• neighbor-id ” Neighbor's OSPF router ID.

• int-name ” Interface name.

• int-number ” Interface number.

Purpose: To display all link-state information requested by a router. An OSPF process ID can be used if more than one OSPF process is active using the form show ip ospf process-id request-list. The output of this command can be filtered, using regular expressions, by one of the following forms:

  show ip ospf request-list   begin   regular-expression   show ip ospf request-list   exclude   regular-expression   show ip ospf request-list   include   regular-expression  

Initial Cisco IOS Software Release: 10.2

Example: Displaying Request List Information for a Particular OSPF Neighbor

The following is a representative output from the show ip ospf request-list EXEC command.

 r2#  show ip ospf request-list 3.3.3.3  OSPF Router with ID (2.2.2.2) (Process ID 1)  Neighbor 3.3.3.3, interface Serial0/1 address 10.1.1.6  Type  LS ID           ADV RTR         Seq NO      Age    Checksum     1  3.3.3.3         3.3.3.3         0x8000020C  9       0x6572