Using what you have learned, fill in the blanks with the command entries needed to draw the structure in Figure 2.7.1a. Use each of the Cartesian coordinate methods “ absolute, relative, and polar. Then draw the object using each of the methods . (Grid marks are 1" apart.) Save the drawing as MyM.dwg in the C:\Steps\Lesson02 folder. (Pick here for a printable table on which to write your answers.)
Figure 2.7.1a:
Create a drawing(s) using
either templates or wizards. Draw each of the figures shown in Figure 2.7.2a. (Grid marks are 1" apart.) Save the drawing as MyLines.dwg in the C:\Steps\Lesson02 folder.
Figure 2.7.2a:
Create the snowflake in Figure 2.7.3a using what you have learned. Don't try to draw the centerlines or the dimensions.
Figure 2.7.3a:
Now create the drawings in Figure 2.7.4a. The grid is ¼".
Figure 2.7.4a: