Conditional Statements


A conditional statement in PHP begins with the keyword if, followed by a condition in parentheses. The following example checks whether the value of the variable $number is less than 10, and the echo statement displays its message only if this is the case:

 $number = 5; if ($number < 10) {   echo "$number is less than ten"; } 

The condition $number < 10 is satisfied if the value on the left of the < symbol is smaller than the value on the right. If this condition holds true, then the code in the following set of braces will be executed; otherwise, the script jumps to the next statement after the closing brace.

Boolean Values Every conditional expression evaluates to a Boolean value, and an if statement simply acts on a trUE or FALSE value to determine whether the next block of code should be executed. Any zero value in PHP is considered FALSE, and any nonzero value is considered trUE.


As it stands, the previous example will be trUE because 5 is less than 10, so the statement in braces is executed, and the corresponding output is displayed. Now, if you change the initial value of $number to 10 or higher and rerun the script, the condition fails, and no output is produced.

Braces are used in PHP to group blocks of code together. In a conditional statement, they surround the section of code that is to be executed if the preceding condition is true.

Brackets and Braces You will come across three types of brackets when writing PHP scripts. The most commonly used terminology for each type is parentheses (()), braces ({}), and square brackets ([]).


Braces are not required after an if statement. If they are omitted, the following single statement is executed if the condition is true. Any subsequent statements are executed, regardless of the status of the conditional.

Braces and Indentation Although how your code is indented makes no difference to PHP, it is customary to indent blocks of code inside braces with a few space characters to visually separate that block from other statements.

Even if you only want a condition or loop to apply to one statement, it is still useful to use braces for clarity. It is particularly important in order to keep things readable when you're nesting multiple constructs.


Conditional Operators

PHP allows you to perform a number of different comparisons, to check for the equality or relative size of two values. PHP's conditional operators are shown in Table 3.1.

Table 3.1. Conditional Operators in PHP

Operator

Description

==

Is equal to

===

Is identical to (is equal and is the same data type)

!=

Is not equal to

!==

Is not identical to

<

Is less than

<=

Is less than or equal to

>

Is greater than

>=

Is greater than or equal to


= or ==? Be careful when comparing for equality to use a double equals symbol (==). A single = is always an assignment operator and, unless the value assigned is zero, your condition will always return trueand remember that TRUE is any nonzero value. Always use == when comparing two values to avoid headaches.


Logical Operators

You can combine multiple expressions to check two or more criteria in a single conditional statement. For example, the following statement checks whether the value of $number is between 5 and 10:

 $number = 8; if ($number >= 5 and $number <= 10) {   echo "$number is between five and ten"; } 

The keyword and is a logical operator, which signifies that the overall condition will be true only if the expressions on either side are true. That is, $number has to be both greater than or equal to 5 and less than or equal to 10.

Table 3.2 shows the logical operators that can be used in PHP.

Table 3.2. Logical Operators in PHP

Operator

Name

Description

! a

NOT

True if a is not true

a && b

AND

True if both a and b are true

a || b

OR

True if either a or b is true

a and b

AND

True if both a and b are true

a xor b

XOR

True if a or b is true, but not both

a or b

OR

True if either a or b is true


You may have noticed that there are two different ways of performing a logical AND or OR in PHP. The difference between and and && (and between or and ||) is the precedence used to evaluate expressions.

Table 3.2 lists the highest-precedence operators first. The following conditions, which appear to do the same thing, are subtly but significantly different:

 a or b and c a || b and c 

In the former condition, the and takes precedence and is evaluated first. The overall condition is true if a is true or if both b and c are true.

In the latter condition, the || takes precedence, so c must be true, as must either a or b, to satisfy the condition.

Operator Symbols Note that the logical AND and OR operators are the double symbols && and ||, respectively. These symbols, when used singularly, have a different meaning, as you will see in Lesson 5, "Working with Numbers."


Multiple Condition Branches

By using an else clause with an if statement, you can specify an alternate action to be taken if the condition is not met. The following example tests the value of $number and displays a message that says whether it is greater than or less than 10:

 $number = 16; if ($number < 10) {   echo "$number is less than ten"; } else {   echo "$number is more than ten"; } 

The else clause provides an either/or mechanism for conditional statements. To add more branches to a conditional statement, the elseif keyword can be used to add a further condition that is checked only if the previous condition in the statement fails.

The following example uses the date function to find the current time of daydate("H") gives a number between 0 and 23 that represents the hour on the clockand displays an appropriate greeting:

 $hour = date("H"); if ($hour < 12) {   echo "Good morning"; } elseif ($hour < 17) {   echo "Good afternoon"; } else {   echo "Good evening"; } 

This code displays Good morning if the server time is between midnight and 11:59, Good afternoon from midday to 4:59 p.m., and Good evening from 5 p.m. onward.

Notice that the elseif condition only checks that $hour is less than 17 (5 p.m.). It does not need to check that the value is between 12 and 17 because the initial if condition ensures that PHP will not get as far as the elseif if $hour is less than 12.

The code in the else clause is executed if all else fails. For values of $hour that are 17 or higher, neither the if nor the elseif condition will be true.

elseif Versus else if In PHP you can also write elseif as two words: else if. The way PHP interprets this variation is slightly different, but its behavior is exactly the same.


The switch Statement

An if statement can contain as many elseif clauses as you need, but including many of these clauses can often create cumbersome code, and an alternative is available. switch is a conditional statement that can have multiple branches in a much more compact format.

The following example uses a switch statement to check $name against two lists to see whether it belongs to a friend:

 switch ($name) {   case "Damon":   case "Shelley":     echo "Welcome, $name, you are my friend";     break;   case "Adolf":   case "Saddam":     echo "You are no friend of mine, $name";     break;   default:     echo "I do not know who you are, $name"; } 

Each case statement defines a value for which the next block of PHP code will be executed. If you assign your first name to $name and run this script, you will be greeted as a friend if your name is Damon or Shelley, and you will be told that you are not a friend if your name is either Adolf or Saddam. If you have any other name, the script will tell you it does not know who you are.

There can be any number of case statements preceding the PHP code to which they relate. If the value that is being tested by the switch statement (in this case $name) matches any one of them, any subsequent PHP code will be executed until a break command is reached.

Breaking Out The break statement is important in a switch statement. When a case statement has been matched, any PHP code that follows will be executedeven if there is another case statement checking for a different value. This behavior can sometimes be useful, but mostly it is not what you wantso remember to put a break after every case.


Any other value for $name will cause the default code block to be executed. As with an else clause, default is optional and supplies an action to be taken if nothing else is appropriate.



    Sams Teach Yourself PHP in 10 Minutes
    Sams Teach Yourself PHP in 10 Minutes
    ISBN: 0672327627
    EAN: 2147483647
    Year: 2005
    Pages: 151
    Authors: Chris Newman

    Similar book on Amazon

    flylib.com © 2008-2017.
    If you may any questions please contact us: flylib@qtcs.net