Section 10.8. Firewalls

10.8. Firewalls

As the name suggests, a firewall protects data from the outside world. A firewall can be a software program or a hardware device. A firewall a popular security mechanism for networks. A firewall is a simple router implemented with a special program. This unit is placed between hosts of a certain network and the outside world, as shown in Figure 10.8, and the rest of the network. The security issues faced by a smaller network like the one used at home are similar to larger networks. A firewall is used to protect the network from unwanted Web sites and potential hackers.

Figure 10.8. A simple configuration of a secured network using a firewall

A firewall is placed on the link between a network router and the Internet or between a user and a router. The objective of such a configuration is to monitor and filter packets coming from unknown sources. Consequently, hackers do not have access to penetrate through a system if a firewall protects the system. For a large company with many small networks, the firewall is placed on every connection attached to the Internet. Companies can set rules about how their networks or particular systems need to work in order to maintain security. Companies can also set rules on how a system can connect to Web sites. These precautionary rules are followed in order to attain the advantage of having a firewall. Hence, the firewall can control how a network works with an Internet connection. A firewall can also be used to control data traffic.

Software firewall programs can be installed in home computers by using an Internet connection with these so-called gateways, the computer with such a software can access Web servers only through this software firewall. But hardware firewalls are more secure than software firewalls. Moreover, hardware firewalls are not expensive. Some firewalls also offer virus protection. The biggest security advantage of installing a firewall in a business network is to protect from any outsider logging on to the network under protection. Firewalls are preferred for use in almost all network security infrastructures , as they allow the implementation of a security policy in one centralized place rather than end to end. Sometimes, a firewall is put where a large amount of data flow is normally expected.

A firewall controls the flow of traffic by one of the following three methods . The first method is packet filtering . Apart from forwarding packets between networks, a firewall filters those packets that pass through. If packets can get through the filter, they reach their destinations; otherwise , they are discarded. A firewall can be programmed to throw away certain packets addressed to a particular IP host or TCP port number. This condition is especially useful if a particular host does not want to respond to any access from an external source.

The second method is that a firewall filters packets based on the source IP address. This filtering is helpful when a host has to be protected from any unwanted external packets. The third method, denial of service, was explained earlier. This method controls the number of packets entering a network.