Dealing with Hard Drive Problems
| Yes, it happens. Hard disks endure a great deal of hard use and can and do go bad over time. This is especially so if your computer is in a space subjected to dirt and dust and cigarette smoke. The cleaner the room and the less abuse subjected, the longer your disks last. But how do you know that your hard disk has died? The first symptom is that when you try to turn on your computer, your hard disk spins and whirs and makes a lot of noise, but then nothing happens your system appears to be stuck in the startup process. The second symptom is that your system tries to start but then displays one of the following error messages (before launching Windows):
Whether your system won't start outright or you receive one of these error messages, there are a handful of steps you can take to try to get your PC up and running again, which we'll discuss next. Problem: You Can't Access Your Hard DriveAny number of problems can cause your hard drive to disappear. The key to diagnosing your specific problem is to follow a detailed troubleshooting procedure, outlined in the following steps. In order, then, try the following:
If all else fails, don't be embarrassed about turning to a pro for help. A qualified computer technician often stands a better chance of fixing your system and restoring your data after a major disk disaster than you do. If you try and try and try again and still can't bring your hard disk back from the dead, then by all means call someone who gets paid to do the dirty work. Note, however, that repairing a hard drive will probably cost more than just buying a new one so the best course of action here is likely to be throwing the old one away and getting a new one. Problem: You Just Installed a New Hard Disk and It Doesn't WorkNaturally, you might have just bought a lemon, but it's more likely that you did something wrong during the installation process. The two most likely culprits are (1) misconfigured jumpers and (2) incorrect connections. Let's tackle each one separately. As you remember from Chapter 4, when you install a hard disk you have to configure its jumpers according to how the disk will be used. You typically have three choices: master, slave, and cable select. Chances are, you got the jumpers wrong. If the new drive is to be your main (C:) drive, you should choose the master position unless your system is configured for cable select usage. If you had the jumpers one way, try them the other. And if this is to be a secondary (D: or later) drive, set the jumpers for the slave position or the cable select position, depending. Again, try it both ways. While you're fiddling with the jumpers, check the installation manual and make sure you've properly configured the drive as either IDE 1 or IDE 2. You'll use the IDE 1 position if this drive is meant to be your main (C:) drive. The second likely cause of your problem comes from incorrectly connecting the internal data cable. It's fairly easy (too easy) to connect the cable upside down. Try reversing the cable, taking care to line up the colored band on the side of the cable itself. It's also possible that you can't run two drives off the same data cable. Although this configuration should work, sometimes it doesn't. That's why there are two IDE data cables inside your PC. (The second might be connected to your CD/DVD drive.) Both cables have two connectors, so you can try a variety of different connections to find one that works. If the problem continues, you might need to update your PC's CMOS BIOS. (This likely involves downloading a BIOS patch from the manufacturer's Web site, or calling their tech support to obtain the update on disk.) When you update the BIOS, make any recommended changes to jumpers on your PC's motherboard; the updated BIOS should then recognize your new hard drive. Problem: You Lost Valuable Data on a Bad Hard DiskIf you have irreplaceable data on a bad hard disk, all is not necessarily lost. There are companies that specialize in saving "lost" data from otherwise inaccessible disks. These data recovery services charge an arm an a leg anywhere from $200 to $2,000 so you won't want to use them just to recover MP3 files and holiday recipes. But if you have truly valuable data on a disk that has gone bad, you should consider this option. Some of the larger data recovery firms include the following:
Problem: Windows Doesn't Recognize Your Hard Disk's Full SizeIn spite of what you might think, this isn't a Windows problem; it's a system setup problem. For some reason, when you installed the hard disk, your system BIOS didn't recognize the correct settings. You'll need to enter your CMOS BIOS setup utility and reconfigure the hard drive setting to "auto." When you reboot your system, your BIOS should recognize the hard drive during the startup process and register the proper size. It's also possible that you're installing a really big hard disk on a much older PC. The BIOS on some older computers simply won't recognize hard disks over a certain size nor will some older versions of Windows. (For example, Windows 95 only recognizes hard disks up to 2GB.) If you're using an older BIOS, you can try updating the BIOS (check with your PC's manufacturer), but you're probably stuck using smaller-sized hard disks or using a utility like PowerQuest's Partition Magic (www.powerquest.com) to partition a single large drive into multiple smaller partitions. Problem: Your Hard Disk Is Running Slower Than NormalThis problem is most often caused by a fragmented disk. You need to run the Windows Disk Defragmenter utility to clean up your disk and get it back up to speed. See Chapter 19, "Simple Steps to Keep Your System in Tip-Top Shape," for more details. |
EAN: 2147483647
Pages: 206