Command | Description |
|---|
accept-lifetime start-time {infinite | end-time | duration seconds} | Specifies the time period during which the authentication key on a key chain is received as valid. |
auto-summary | Enables automatic summarization at network boundaries. This command is enabled by default. |
bandwidth kilobits | Specifies the bandwidth parameter, in kilobits per second, on an interface. |
debug eigrp packets | Displays EIGRP packet activity. |
debug ip eigrp neighbor process-id address | Adds a filter to the debug eigrp packets command, telling it to display only IP packets for the indicated process and neighbor. |
delay tens-of-microseconds | Specifies the delay parameter, in tens of microseconds, on an interface. |
eigrp stub {connected | redistributed | static | summary | receive-only} | Configures a spoke router as an EIGRP stub. |
ip authentication key-chain eigrp process-id key-chain | Configures a key chain on an EIGRP interface and specifies the name of the key chain to be used. |
ip authentication mode eigrp process-id md5 | Enables EIGRP authentication on an interface. |
ip bandwidth-percent eigrp process-id percent | Configures the percentage of bandwidth used by EIGRP; the default is 50 percent. |
ip hello-interval eigrp process-id seconds | Configures the EIGRP hello interval. |
ip hold-time eigrp process-id seconds | Configures the EIGRP hold time. |
ip summary-address eigrp process-id address mask | Configures a router to send a summary EIGRP advertisement. |
key number | Specifies a key on a key chain. |
key chain name-of-chain | Specifies a group of authentication keys. |
key-string text | Specifies the authentication string, or password, used by a key. |
metric weights tos k1 k2 k3 k4 k5 | Specifies how much weight the bandwidth, load, delay, reliability, and MTU size parameters should be given in the IGRP and EIGRP metric calculations. |
network network-number | Specifies the network address of one or more interfaces on which IGRP, EIGRP, or RIP processes should be enabled. |
passive-interface type number | Disables the transmission of broadcast or multicast routing updates on an interface. |
router eigrp process-id | Enables an EIGRP process. |
send-lifetime start-time {infinite | end-time | duration seconds} | Specifies the time period during which the authentication key on a key chain may be sent. |
show ip eigrp neighbors [type number] | Displays the EIGRP neighbor table. |
show ip eigrp topology [process-id | [[ip address] mask]] | Displays the EIGRP topology table. |
timers active-time {minutes | disabled} | Changes or disables the default 3-minute active time. |
traffic-share {balanced | min} | Specifies whether an IGRP or EIGRP routing process should use unequal-cost load balancing or equal-cost load balancing only. |
variance multiplier | Specifies a route multiplier by which a route metric can vary from the lowest-cost metric and still be included in an unequal-cost load balancing group. |
