Older portables often used proprietary memory modules, meaning that they were custom designed by the system manufacturer and normally could be purchased only from that manufacturer. That not only meant that replacing or upgrading memory was expensive, it was also harder to find, because in many cases the memory could only be purchased from the original manufacturer. Some of the first laptop systems in late 80s and early 90s used proprietary memory cartridges that looked like modern PC Cards but plugged into a dedicated PCMCIA (Personal Computer Memory Card International Association) memory socket inside the system. Gradually, most of the manufacturers shifted their designs to using industry-standard memory modules, which are interchangeable, much easier to find, and much less expensive overall. Most modern systems now use industry-standard memory modules that are specifically designed for smaller or portable systems. Most of these industry-standard memory chip and module designs are created by the JEDEC (Joint Electron Device Engineering Council) Solid State Technology Association.
Although there are a variety of industry-standard types of memory and modules, most modern portables including laptops, notebooks , and Tablet PCs, use one of several types of DIMMs called small outline DIMMs (SO-DIMMs). SO-DIMMs are physically smaller but similar electrically to the larger DIMMs used in desktop systems. SO-DIMMs typically are available in extended data out (EDO) or synchronous DRAM (SDRAM) form, with various speeds and voltages available. An even smaller class of modules, called Micro-DIMMs , are used by subnotebook, palmtop, and handheld systems. These are available in several industry-standard JEDEC-approved designs as well. In any case, be sure the memory you purchase works with your system or that you can get a refund or replacement if it doesn't. Even though industry standards exist and modules from many sources will often fit a given system, I normally recommend that you look for memory modules that have been approved by the system manufacturer for the system, in the configurations specified by the manufacturer. Often times a list of approved modules or suppliers can be found in the system documentation or on the system manufacturer's Web site. |