Written Lab

Write the answers to the following questions:

1.	Write the command that enables MLS globally on an external router.
2.	Write the command that assigns the VTP domain to the external router’s interface. Use cisco as the VTP domain name.
3.	Write the command that assigns VLAN 5 to the interface.
4.	Write the command that configures an external router interface to allow MLSP packets across it.
5.	Write the command that shows you MLS information on a switch.
6.	Write the command that shows you the XTAG information on a switch.
7.	Write the command that displays all the layer 3 cache entries.
8.	Write the command that displays a layer 3 cache entry based on the destination IP address of 172.16.10.100.
9.	Write the command to clear all MLS cache entries.
10.	Write the command that sets the fast aging time to 64 and the packet threshold to 63.

Answers

1.	mls rp ip
2.	mls rp vtp-domain cisco
3.	mls rp vlan-id 5
4.	mls rp management-interface
5.	show mls
6.	show mls
7.	show mls entry
8.	show mls entry ip destination 172.16.10.100
9.	clear mls entry destination all
10.	set mls agingtime fast 64 63