| A scene stores all EQ, routing, fader-position, pan-position, effects, V-Track selection, and master-level settings. Scenes are very useful at mixing time. They allow you to experiment with different mixes of your song and then save the mixes with the song. You can store up to eight different scenes per song. You can only change scenes when the VS-1680 is not playing. Saving a Mixer Scene After you adjust all your mixer settings the way you want, you should save your mix as a scene: | 1. | Press SCENE. The button indicator will light. Whenever the SCENE indicator is lit, the locator buttons are ready to store and recall scenes. Any locator buttons that are blinking have a scene stored on them. The locator buttons that are unlit are available to store a scene.
| | 2. | Press any locator button that is not lit.
| Recalling a Mixer Scene To recall a mixer scene, make sure the song is not in Play mode, then do the following: | 1. | Press SCENE. All locator buttons that have scenes on them will be lit.
| | 2. | Press the appropriate locator button for the scene you wish to use.
| Deleting a Mixer Scene You can delete scenes while the song is not playing by doing the following: | 1. | Press SCENE. All locator buttons that have scenes on them will be lit.
| | 2. | Hold CLEAR and press the locator button for the scene you want to delete.
| Updating a Mixer Scene You can make changes to a saved scene. This is done by recalling than deleting a scene. Make your desired changes to the mixer settings and then restore the scene. Follow the steps below to update a mixer scene: | 1. | Press SCENE.
| | 2. | Press the locator button for the scene you wish to update. After the scene is recalled, the scene returns to the playlist display and the scene indicator goes off.
| | 3. | Press SCENE again.
| | 4. | Hold CLEAR and press the locator for the scene you wish to update.
| | 5. | Make the desired changes to the mixer. You don't have to make changes to every mixer setting. You only need to make adjustments to the mixer settings you wanted to update from the previous scene.
| | 6. | Press SCENE.
| | 7. | Press the locator button to save the scene again.
| | 