Section 2: IP IGP Protocols (28 Points)


Configure the IP routing as in Figure 2-13 and redistribute protocols to ensure full IP visibility between routers. Advertise all router networks within the appropriate routing protocol.

Figure 2-13. IP IGP Diagram


Section 2.1: EIGRP (8 Points)

  • Configure EIGRP AS20 and AS30 as shown in Figure 2-13.

  • Ensure that any router running EIGRP has its loopback interface advertised within EIGRP.

  • Inject at 10/8 summary route into EIGRP AS30 from R1.

  • Make R1 generate a default route into EIGRP AS30 without using static/default routes.

  • Ensure that no host routes are propagated throughout the network at this point of the lab.

  • Encrypt all EIGRP routing updates using a method that will be difficult to detect the password.

Section 2.2: OSPF (13 Points)

  • Configure OSPF as shown in Figure 2-13 with the process on each router as 30.

  • Ensure that OSPF-only routers have their loopback interfaces advertised in the same area as that of the Ethernet interface.

  • Do not use the interface command ip ospf network over the ATM network.

  • Add a loopback address of 10.200.200.1/29 onto R5 and ensure that this network is seen and reachable via the entire network. Do not add this network into existing R5 OSPF areas, redistribute as a connected network, or add further routing protocols on R5. Do not add any static routes pointing to R5 on any other routers. You may policy route in your solution.

  • Ensure the only types of LSA propagated within OSPF area 2 are type 1, 2, and 3.

  • Encrypt all OSPF routing updates using a method that will be difficult to detect the password.

  • Ensure no host routes are propagated throughout the network at this point of the lab.

Section 2.3: Redistribution (7 Points)

  • Redistribute EIGRP AS30 into OSPF, allow all routes found in AS30 into OSPF except for the 0/0 route and do not use any distribute lists.

  • Redistribute only the EIGRP AS30 routes into EIGRP AS20; once again do not use any distribute lists and do not selectively redistribute by matching external OSPF routes to achieve this.

  • Redistribute EIGRP AS20 into OSPF.




CCIE Routing and Switching Practice Labs
CCIE Routing and Switching Practice Labs
ISBN: 1587051478
EAN: 2147483647
Year: 2006
Pages: 268

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net