The Matrix Pattern Sequencer

[ LiB ]

The Matrix works similarly to the Redrum; however, the Matrix is used to create patterns that play sound modules devices, such as SubTractor and Malstr m.

Loading the Necessary Devices

Since the Matrix is used to play sound modules, you will need to load at least one sound module to hear the Matrix's magic. For this exercise, you'll use the SubTractor. (Before loading the devices, remove the Redrum from the rack.)

NOTE

For the proper connection to be set up automatically, the SubTractor must be loaded into the rack before the Matrix.

Programming Patterns

Just like the Redrum, the Matrix allows you to program patterns that can be saved in one of its 32 presets (four banks of eight patterns). Take a look at how to program patterns with the Matrix.

Pattern Triggers

With the Redrum, you used the white pads to trigger the drum samples; with the Matrix, there are two separate triggers that need to be programmed to play the sound module.

Programming the Triggers

Next you can program a very simple synthesizer line that will be played by the SubTractor.

NOTE

The height of the red lines in the Gate trigger reflects the velocity level of the note to be played.

Octave Edit

You can edit notes in different octaves with the Octave selector.

NOTE

The Matrix is equipped with controls that allow you to alter the step size and number of steps in the pattern. Additionally, you can apply shuffle to the Matrix's patterns. Remember that the shuffle amount is located on the transport panel and will control the amount of shuffle on all loaded pattern devices.

NOTE

Along the top of the pattern's grid, a red line indicates the length of the pattern. If you increase the step value, you will see this line extending.

[ LiB ]