Command Line PPP Access: wvdial

---

If, for some reason, you have been unable to set up a modem connection on your X Window System, you may have to set it up from the command line interface instead of a desktop. For a dial-up PPP connection, you can use the wvdial dialer. wvdial is an intelligent dialer, which not only dials up an ISP service but also performs login operations, supplying your username and password. wvdial first loads its configuration from the /etc/wvdial.conf file. In here, you can place modem and account information, including modem speed and serial device, as well as ISP phone number, username, and password. The wvdial.conf file is organized into sections, beginning with a section label enclosed in brackets. A section holds variables for different parameters that are assigned values, such as username = chris. The default section holds default values inherited by other sections, so you needn't repeat them. Table 5-2 lists the wvdial variables.

Table 5-2: Variables for wvdial

Variable	Description
Inherits	Explicitly inherits from the specified section. By default, sections inherit from the [Dialer Defaults] section.
Modem	The device wvdial should use as your modem. The default is /dev/modem.
Baud	The speed at which wvdial communicates with your modem. The default is 57,600 baud.
Init1 ... Init9	Specifies the initialization strings to be used by your modem. wvdial can use up to 9. The default is "ATZ" for Init1.
Phone	The phone number you want wvdial to dial.
Area Code	Specifies the area code, if any.
Dial Prefix	Specifies any needed dialing prefix—for example, 70 to disable call waiting or 9 for an outside line.
Dial Command	Specifies the dial operation. The default is "ATDT".
Login	Specifies the username you use at your ISP.
Login Prompt	If your ISP has an unusual login prompt, you can specify it here.
Password	Specifies the password you use at your ISP.
Password Prompt	If your ISP has an unusual password prompt, you can specify it here.
Force Address	Specifies a static IP address to use (for ISPs that provide static IP addresses to users).
Remote Name	For PAP or CHAP authentication, you may have to change this to your ISP's authentication name. The default value is *.
Carrier Check	Setting this option to No disables the carrier check by your modem. Used for a modem that reports its carrier line is always down.
Stupid Mode	In Stupid Mode, wvdial does not attempt to interpret any prompts from the terminal server and starts pppd after the modem connects.
Auto Reconnect	If enabled, wvdial attempts to reestablish a connection automatically if you are randomly disconnected by the other side. This option is on by default.

You can use the wvdialconf utility to create a default wvdial.conf file for you automatically. wvdialconf will detect your modem and set default values for basic features. You can then edit the wvdial.conf file and modify the Phone, Username, and Password entries with your ISP dial-up information. Remove the preceding semicolon (;) to unquote the entry. Any line beginning with a semicolon is ignored as a comment.

$ wvdialconf 

You can also create a named dialer, such as myisp in the following example. This is helpful if you have different ISPs you log in to. The following example shows the /etc/wvdial.conf file:

/etc/wvdial.conf [Modem0]

 Modem = /dev/ttyS0    Baud = 57600 Init1 = ATZ SetVolume = 0 Dial Command = ATDT     [Dialer Defaults] Modem = /dev/ttyS0 Baud = 57600 Init1 = ATZ SetVolume = 0 Dial Command = ATDT     [Dialer myisp] Username = chris Password = mypassword Modem = /dev/ttyS0 Phone = 555-5555 Area Code = 555 Baud = 57600 Stupid mode = 0 

To start wvdial, enter the command wvdial, which then reads the connection configuration information from the /etc/wvdial.conf file. wvdial dials the ISP and initiates the PPP connection, providing your username and password when requested.

$ wvdial

You can set up connection configurations for any number of connections in the /etc/wvdial.conf file. To select one, enter its label as an argument to the wvdial command, as shown here:

$ wvdial myisp

---