Summary

In this chapter, we examined how to easily set up a Solaris DHCP server that can be used to dynamically allocate IP addresses to clients from several different operating systems. Although DHCP server setup involves making some complex decisions about your network architecture, setting up DHCP clients is easy. It's generally considered easier to configure a single server per subnet than 254 clients that all require their settings to be entered manually! However, DHCP administrators should be aware of a number of important security issues, such as the possibility of IP spoofing occurring, and watch the CERT site ( http://www.cert.org/ ) for any advisories.

Questions

1.	What is the DHCP server command? dhcp in.dhcpd dhcp_server server_dhcp
2.	What is the DHCP client command? dhcpagent in.dhcpd dhcp_client client_dhcp
3.	When configuring DHCP services, which of the following parameters are you not prompted for? Time zone NIS server NIS+ server LDAP server
4.	What command is used to manually update the contents of dhcptab? dhtadm dhtconfig dhcpd.in dhcpadm
5.	What Internet Protocol provides the greatest number of IP addresses? IPv4 IPv6 IPv8 None of the above
6.	What Internet Protocols are supported by Solaris 9? IPv4 and IPv6 IPv6 and IPv8 IP4 and IPv8 None of the above
7.	What does DHCP provide? Static IP addresses Multiple IP addresses per network interface Leased IP addresses Firewalls
8.	What is the relationship between BOOTP and DHCP? DHCP is a superset of BOOTP. BOOTP is for Windows; DHCP is for Solaris. BOOTP is for Linux; DHCP is for Solaris. DHCP is a subset of BOOTP.
9.	What other protocols does DHCP integrate with? LDAP SNMP BOOTP All of the above
10.	What message is broadcast by a client looking for an IP address? DHCPACK DHCPFIND DHCPDISCOVER DHCP_TX
11.	What message is broadcast by a server providing IP addresses? DHCPOFFER DHCPSERVE DHCPSERVICE DHCP_SRV
12.	What message is broadcast by a client finished with an IP address? DHCPEND DHCPFINISH DHCPRELEASE DHCP_END
13.	What message is broadcast by a server that can't provide IP addresses as specified? DHCPFAIL DHCPNACK DHCPOFF DHCP_NO_CAN_DO
14.	What message is sent by a server acknowledging a lease? DHCPOK DHCPGOOD DHCPACK DHCPBACK
15.	What command is used to by clients to specify interface configuration using DHCP? dhcp dhcpd ifconfig route

Answers

1.	B. The DHCP server command is in.dhcpd .
2.	A. The DHCP client command is dhcpagent .
3.	D. When configuring DHCP services, you are not prompted for the LDAP server name .
4.	A. The dhtadm command is used to manually update the contents of dhcptab.
5.	B. IPv6 provides the greatest number of IP addresses.
6.	A. IPv4 and IPv6 are both supported by Solaris.
7.	C. DHCP provides leased IP addresses.
8.	A. DHCP is a superset of BOOTP.
9.	C. DHCP integrates with BOOTP.
10.	C. DHCPDISCOVER is broadcast by a client looking for an IP address.
11.	A. DHCPOFFER is broadcast by a server providing IP addresses.
12.	C. DHCPRELEASE is broadcast by a client finished with an IP address.
13.	B. DHCPNACK is broadcast by a server that can't provide IP addresses as specified.
14.	C. DHCPACK is sent by a server acknowledging a lease.
15.	C. The ifconfig command is used to by clients to specify interface configuration using DHCP.