Write the answers to the following questions:
1. | What command enables QoS on a 3550 switch? |
|
2. | What is the command used to display QoS information on a 4000 switch running CatOS? |
|
3. | Write the command to set the bandwidth of the Weighted Round Robin Queues on a 2950 to 40, 30, 20, and 10, respectively. |
|
4. | What mode is used to enable QoS on an IOS-based switch? |
|
5. | What match options in a class-map are available on a 2950 switch running standard edition software? |
|
6. | What is the interface command to enable auto-QoS for a connected Cisco IP phone to be implemented? |
|
7. | Write the command to set the class of service to 0 for the only configurable threshold on queue 1 of a 2q1t port on a Catalyst 4000 running CatOS. |
|
8. | What command is used to display information about the QoS configuration, with respect to DSCP mapping, on a 3550 switch? |
|
9. | What is the command used to set the HSRP priority to 105? |
|
10. | What is the default hello timer for HSRP? |
|
Answers
1. | mls qos |
2. | show qos info config |
3. | wrr-queue bandwidth 40 30 20 10 |
4. | Global configuration mode |
5. | access-group, input-interface, mpls, protocol |
6. | auto qos voip cisco-phone |
7. | set qos map 2q1t 2 1 cos 0 |
8. | show mls qos map cos-dscp |
9. | standby priority 105 |
10. | 3 seconds |