"Do I Know This Already?" Quiz The purpose of the "Do I Know This Already?" quiz is to help you decide whether you need to read the entire chapter. If you already intend to read the entire chapter, you do not necessarily need to answer these questions now. The 12-question quiz, derived from the major sections in the "Foundation Topics" portion of the chapter, helps you determine how to spend your limited study time. Table 4-1 outlines the major topics discussed in this chapter and the "Do I Know This Already?" quiz questions that correspond to those topics. Table 4-1. "Do I Know This Already?" Foundation Topics Section-to-Question MappingFoundation Topics Section | Questions Covered in This Section | Score |
|---|
Switch Management | 17 | | Switch File Management | 810 | | Troubleshooting from the Operating System | 1112 | | Total Score | | |
Caution The goal of self-assessment is to gauge your mastery of the topics in this chapter. If you do not know the answer to a question or are only partially sure of the answer, you should mark this question wrong. Giving yourself credit for an answer you correctly guess skews your self-assessment results and might provide you with a false sense of security.
| 1. | Which of the following is an operating system available on Cisco Catalyst 3750, 4500, and 6500 family switches? Catalyst OS Cisco IOS Software SNMP QoS
| | 2. | Which of the following is not a valid way to connect to a Catalyst switch? Telnet rsh Async serial rlogin
| | 3. | Which user interface mode allows the greatest authority for making configuration changes? User EXEC mode Privileged EXEC (enable) mode Telnet mode Root mode
| | 4. | To configure a password for Telnet access to a switch, which one of the following must the password be applied to? interface vlan 1 line con 0 line vty 0 15 hostname
| | 5. | Which of the following is not required to set up Telnet access to a switch? Password on vty IP address Default gateway or route Enable password
| | 6. | Which protocol is used to exchange information between connected Cisco neighbors? SNMP VTP CDP STP
| | 7. | Cisco Discovery Protocol is sent over which OSI layer? Layer 1 Layer 2 Layer 3 Layer 4
| | 8. | Which Catalyst file system contains the Cisco IOS Software image? Running-config RAM Flash NVRAM
| | 9. | Which command saves newly made configuration changes so that they will be used automatically after the next switch reload? save all copy running-config flash: copy startup-config running-config copy running-config startup-config
| | 10. | If the erase flash: command is given, what is the next logical step? copy tftp: flash: copy running-config startup-config erase startup-config copy startup-config flash:
| | 11. | What command can you use to examine the Gigabit Ethernet 3/1 interface's current configuration? show interface gigabitethernet 3/1 show gigabit ethernet 3/1 show startup-config interface gig 3/1 show running-config interface gig 3/1
| | 12. | What command can you use to view information received from a neighboring Cisco switch, including its version of Cisco IOS Software? show neighbors show cdp neighbors all show all neighbors show cdp neighbors detail
|
You can find the answers to the quiz in Appendix A, "Answers to Chapter 'Do I Know This Already?' Quizzes and Q&A Sections." The suggested choices for your next step are as follows: - 7 or less overall scoreRead the entire chapter. This section includes the "Foundation Topics," "Foundation Summary," and "Q&A" sections.
- 810 overall scoreBegin with the "Foundation Summary" section and then go to the "Q&A" section at the end of the chapter.
- 11 or more overall scoreIf you want more review on these topics, skip to the "Foundation Summary" section and then go to the "Q&A" section at the end of the chapter. Otherwise, move to Chapter 5, "Switch Port Configuration."
|
