Configuring Paging on a JMS Template

To use a configured JMS template to configure paging on a template for destinations, do the following:

1. In the left pane of the Administration console, click the JMS node.

2. Select the JMS Templates node to display all configured templates in the right pane.

3. In the right pane, click the template you want to configure for paging.

4. In the right pane, click on the Thresholds and Quotas tab. To configure bytes paging:

   1. Click on the check box labeled "Select Bytes Paging Enabled."

   2. Specify a threshold value (in bytes) above which bytes paging will start on this server in the Bytes Threshold High box.

   3. Specify a threshold value (in bytes) below which bytes paging will stop on this server in the Bytes Threshold Low box.

5. Also on the Thresholds and Quotas tab, follow the instructions below to configure messages paging:

   1. Click the Messages Paging Enabled check box.

   2. Specify a threshold value above which messages paging will start on this server in the Messages Threshold High box.

   3. Specify a threshold value below which messages paging will stop on this server in the Messages Threshold Low box.

6. When you are satisfied that the values you have entered are complete and correct, click "Apply."

7. Reboot WebLogic server.