Do I Know This Already? Quiz

   

"Do I Know This Already?" Quiz

The purpose of the "Do I Know This Already?" quiz is to help you to decide what parts of this chapter to use. If you already intend to read the entire chapter, you do not necessarily need to answer these questions now.

The 12-question quiz, derived from the major sections in the "Foundation Topics" portion of the chapter, helps you to determine how to spend your limited study time.

Table 12-1 outlines the major topics discussed in this chapter and the "Do I Know This Already?" quiz questions that correspond to those topics.

Table 12-1. "Do I Know This Already?" Foundation Topics Section-to-Question Mapping

Foundation Topics Section

Questions Covered in This Section

Basic Configuration of Integrated IS-IS

13

Optional Integrated IS-IS Commands

46

Verifying the Integrated IS-IS Operation

710

Troubleshooting the Integrated IS-IS Operation

1112

NOTE

The goal of self-assessment is to gauge your mastery of the topics in this chapter. If you do not know the answer to a question or are only partially sure of the answer, you should mark this question wrong for purposes of the self-assessment. Giving yourself credit for an answer you correctly guess skews your self-assessment results and might provide you with a false sense of security.


1:

Which of the following is the correct command to start the Integrated IS-IS routing process?

  1. ip router isis

  2. router isis

  3. routing ip isis

  4. router clns

2:

Where is the Integrated IS-IS routing process started?

  1. At the executive level

  2. At the interface level

  3. At both the executive and interface levels

  4. Underneath the IP routing process

3:

What is the purpose of the net command?

  1. To define the summarized address range on the router interface

  2. To define the area into which the interface is to be placed

  3. To define the IS-IS address on the interface

  4. To define the CLNS address for the router

4:

Where is the routing level changed from the default of Level 1-2?

  1. At the executive level

  2. At the interface level

  3. Underneath the routing process or at the interface level

  4. Underneath the IP routing process

5:

Which of the following are valid commands for changing the routing level?

  1. isis level-2

  2. isis circuit-type level-1

  3. isis router level-1

  4. ip router level 1

6:

Which of the following commands summarizes the subnets 140.100.104.0 to 140.100.111.0 at the area boundary?

  1. summary-address 140.100.104.0 255.255.248.0.

  2. summary-address 140.100.104.0 0.0.7.255.

  3. ip isis summary address 140.100.104.0/21.

  4. None of the above; summarization is supported only in OSPF and EIGRP.

7:

Which of the following are displayed in the command show clns neighbor ?

  1. The contents of the neighbor table

  2. The routing level as defined at the interface level

  3. The System ID of the transmitting neighbor

  4. All of the above

8:

Which of the following are displayed in the command show clns interface ?

  1. The number of LSPs received on the interface

  2. The parity check on the received hellos

  3. The metric of the outgoing interface

  4. The round trip delay

9:

Which of the following are displayed in the command show isis database ?

  1. The root of the SPF tree

  2. The LSPs in the local database

  3. Whether an LSP has been fragmented

  4. The sequence number of the LSPs

10:

Which of the following commands shows whether the ATT bit has been set?

  1. show isis hello packets

  2. show isis database

  3. debug isis interface

  4. debug clns interface

11:

Which of the following are displayed in the command debug isis update-packets ?

  1. Hellos

  2. LSPs

  3. CSNPs

  4. PSNPs

12:

Which of the following are displayed in the command debug isis adjacency -packets ?

  1. The population of the PATH database

  2. The LSPs

  3. Changes in the state of the adjacencies

  4. Hello packets


The answers to this quiz are found in Appendix A, "Answers to Chapter 'Do I Know This Already?' Quizzes and Q&A Sections." The suggested choices for your next step are as follows :

  • 6 or less overall score Read the entire chapter. This includes the "Foundation Topics" and "Foundation Summary" sections, the "Q&A" section, and the "Scenarios" at the end of the chapter.

  • 79 overall score Begin with the "Foundation Summary" section, and then go to the "Q&A" section and the "Scenarios" at the end of the chapter. If you have trouble with these exercises, read the appropriate sections in "Foundation Topics."

  • 10 or more overall score If you want more review on these topics, skip to the "Foundation Summary" section, and then go to the "Q&A" section and the "Scenarios" at the end of the chapter. Otherwise, move to the next chapter.



CCNP BSCI Exam Certification Guide
CCNP BSCI Exam Certification Guide (CCNP Self-Study, 642-801) (3rd Edition)
ISBN: 1587200856
EAN: 2147483647
Year: 2002
Pages: 194
Authors: Clare Gough

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net