The network manager deems the Frame Relay service to be susceptible to packet loss and requires that only TCP is used for DLSw+ features such as address resolution packets and unnumbered information frames. With this in mind, configure DLSw between VLAN3 and VLAN2. Peer from R4-R1 and R4-R6. Use the most appropriate encapsulation and peering method.
Ensure both Frame Relay PVCs are utilized alternatively for each new circuit from R4.
Your network administrator complains of unnecessary DLSw traffic being sent over the network; keep the traffic off the network unless valid user traffic exists that is required to be sent between VLAN2 and VLAN3.
