Section 10: VoIP (6 Points)

• Configure a basic VoIP connection between R3 and R4. Consider the R3 local number to be "33" and R4 local number to be"44."

If you configured this correctly as shown in Example 6-55, you have scored 3 points.

• Configure your dial peers to provide silence when the remote party is not speaking. You can assume that Voice Activity Detection (VAD) is enabled.

You have a VoIP peer configuration and you need to disable VAD in order to have a better voice quality.

If you configured this correctly as shown in Example 6-55, you have scored 3 points.

Example 6-55. VoIP Configuration and Disabling the Background Noise

 R4#sh run | b dial-peer dial-peer cor custom ! ! voice-port 2/0/0  no comfort-noise ! ! dial-peer voice 4 pots  destination-pattern 44  port 2/0/0 ! dial-peer voice 40 voip  destination-pattern 33  session target ipv4:160.10.3.3 R4# ! ________________________________________________________________ R3#sh run | b dial-peer dial-peer cor custom ! voice-port 1/1/0  no comfort-noise ! dial-peer voice 30 voip  destination-pattern 44  session target ipv4:160.10.4.4 ! dial-peer voice 3 pots  destination-pattern 33  port 1/1/0 ! R3#