Summary Table: Chapter 6 Command Review

Command	Description
bandwidth kilobits	Specifies the bandwidth parameter, in kilobits per second, on an interface. Used by some routing protocols to calculate metrics; has no influence on the actual bandwidth of the data link.
delay tens-of-microseconds	Specifies the delay parameter, in tens of microseconds, on an interface. Used by some routing protocols to calculate metrics; has no influence on the actual delay of the data link.
ip address ip-address mask [secondary]	Specifies the ip address and address mask of an interface.
maximum-paths maximum	Specifies the maximum number of parallel routes an IP routing protocol can support, from one to six, with a default of four.
metric holddown	Toggles the IGRP holddown on or off.
metric maximum-hops hops	Specifies the maximum number of hops IGRP can advertise before a route is marked unreachable, with a maximum of 255 and a default of 100.
metric weights tos k1 k2 k3 k4 k5	Specifies how much weight the bandwidth, load, delay, and reliability parameters should be given in the IGRP and EIGRP metric calculations.
neighbor ip-address	Defines a unicast address to which a RIP, IGRP, or EGP routing update should be send.
network network-number	Specifies the network address of one or more directly connected interfaces on which IGRP, EIGRP, or RIP processes should be enabled.
offset-list {access-list-number name }{ in out } offset [ type number ]	Specifies a number of hops (for RIP) or additional delay (for IGRP) to be added to the metrics of incoming or outgoing route advertisements.
passive-interface type number	Disables the transmission of routing updates on an interface.
router igrp autonomous-system	Enables the indicated IGRP routing process on a router.
show interface [ type number ]	Displays the configured and monitored characteristics of an interface.
show ip route [ address [ mask ]][ protocol [ process-ID ]]	Displays the current routing table as a whole or by entry.
timers basic update invalid holddown flush [ sleeptime ]	Adjusts EGP, RIP, or IGRP process timers.
traffic-share { balanced min }	Specifies whether an IGRP or EIGRP routing process should use unequal -cost load balancing or equal cost only.
validate-update-source	Toggles the source address validation function of RIP and IGRP routing processes.
variance multiplier	Specifies a multiplier by which a route metric can vary from the lowest -cost metric and still be included in an unequal-cost load balancing group .