The questions and scenarios in this book are more difficult than what you should experience on the actual exam. The questions do not attempt to cover more breadth or depth than the exam; however, they are designed to make sure that you know the answers. Rather than allowing you to derive the answers from clues hidden inside the questions themselves, the questions challenge your understanding and recall of the subject. Hopefully, these questions will help limit the number of exam questions on which you narrow your choices to two options and then guess.
The answers to these questions can be found in Appendix A.
| 1. | True or false: You can use VTP domains to separate broadcast domains. |
| 2. | What VTP modes can a Catalyst switch be configured for? Can VLANs be created in each of the modes? |
| 3. | How many VTP management domains can a Catalyst switch participate in? How many VTP servers can a management domain have? |
| 4. | What conditions must exist for two Catalyst switches to be in the same VTP management domain? |
| 5. | On a VTP server switch, identify what you can do to reset the VTP configuration revision number to 0. |
| 6. | How can you clear the configuration revision number on a VTP client? |
| 7. | Complete this command to make all VLANs other than 30 and 100 eligible for pruning on the trunk interface: switchport trunk pruning vlan__________ |
| 8. | Which VLAN numbers are never eligible for VTP pruning? Why? |
| 9. | What does the acronym VTP stand for? |
| 10. | What VTP domain name is defined on a new switch with no configuration? |
| 11. | In a network of switches, VTP domain Engineering has been configured with VLANs 1, 10 through 30, and 100. The VTP configuration revision number is currently at 23. Suppose a new switch is connected to the network, and it has the following configuration: VTP domain Engineering, VTP server mode, only VLANs 1 and 2 defined, and configuration revision number of 30. What happens when the switch is connected to the network? |
| 12. | A VTP client switch has VLANs 1, 2, 3, 10, and 30 configured as part of a VTP domain; however, the switch has users connected only to access switch ports defined on VLANs 3 and 30. If VTP pruning is enabled and all VLANs are eligible, which VLANs will be pruned on the upstream switch? |
| 13. | The VTP domain Area3 consists of one server and several clients. The server's VTP configuration revision number is at 11. A new switch is added to the network. It has VTP domain name Area5 and a configuration revision number of 10. What happens when the new switch is added to the network? What happens when the VTP domain name is changed to Area3 on the new switch? |
| 14. | What command shows information about the VTP configuration on a Catalyst 3560? |
