Hack50.Hack the Color of the PSP s Hold Indicator

Hack 50. Hack the Color of the PSP's Hold Indicator

Don't like the color of the hold indicator? Change it.

This hack is something to think about doing while you're messing with the activity LEDs [Hack #49], since it also requires you to open up your PSP [Hack #8] and void your warranty. If this sounds a bit beyond your normal hacking skills, find a guru friend to help out.

6.4.1. Things You Will Need

• Sony PSP (any firmware version)

• Silver Sharpie marker (or any color paint marker)

• Small Phillips head screwdriver

• Soft cloth (optional)

6.4.2. Opening the Case

If you've already changed the color of the activity LEDs [Hack #49], then this step is going to be a nice slice of déjà vu. If you haven't read it, take a look at the "Opening the Case" section from that hack for instructions on opening your PSP.

6.4.3. The Mod

To change the color, you just need to paint the yellow parts of the hold switch piece inside the PSP.

Keep in mind that brighter colors will probably show up better in the hold switch than darker ones, as the only lighting involved with the hold switch is the natural light of the room.

If you really want a hold switch that stands out, consider using some sort of glow paint.

Make sure that the marker or paint is dry. Once that's done, you may begin the reassembly of your PSP by putting the faceplate back on (check for those pesky fingerprints first) and reinstalling the seven screws.

See how simple that was?

Dan Mastin