vparutilvparutil - Works with SCSI- related information of disks in a vPar. vparutil(1M) vparutil(1M) NAME vparutil - get and set SCSI parameters for disk devices from a virtual partition SYNOPSIS vparutil -g dev_path vparutil -s dev_path [id] [rate] DESCRIPTION The vparutil command gets and sets SCSI paramaters for a specified SCSI device from a running virtual partition system. Only a superuser can execute the vparutil command. Options vparutil recognizes the following command-line options: -g Gets the SCSI parameters for the specified SCSI disk device, dev_path. -s Sets the SCSI parameters for the specified SCSI disk device, dev_path. vparutil recognizes the following command-line operands: dev_path The device path of the SCSI disk device. Id The SCSI ID for the specified disk device. rate The SCSI rate for the specified disk device. EXAMPLES Set the SCSI ID for disk at 0/0/2/0.6.0 to 3: # vparutil -s 0/0/2/0.6.0 3 RETURN VALUE 0 Successful. 1 Could not communicate with virtual partition monitor. >1 Other error. AUTHOR vparutil was developed by the Hewlett-Packard Company. |