vpartitionvpartition - Displays information about the vPars Command Line Interface. vpartition(5) vpartition(5) NAME vpartition - display information about the Virtual Partition Command Line Interface SYNOPSIS Vpartition DESCRIPTION This manpage gives a listing and brief description of the commands which are used to manage virtual partitions. Command | Description ______________|_________________________________________________________ vparboot | Boot (start) a virtual partition. | vparcreate | Create a new virtual partition. | vpardump | Manage monitor dump files. | vparextract | Extract memory images from a running virtual partition | system. | vparmodify | Modify an existing virtual partition. | vparreloc | Relocate the load address of a vmunix file, determine | if a vmunix file is relocatable, or promote the scope of | symbols in a relocatable vmunix file. | vparremove | Remove (delete) an existing virtual partition. | vparreset | Send a TOC or hard reset to a virtual partition. | vparresources | Description of virtual partition resourcs and | their requirements. | vparstatus | Display virtual partition and available resources | information. | vparutil | Get and set SCSI parameters for disk devices from | a virtual partition. AUTHOR vpartition was developed by the Hewlett-Packard Company. SEE ALSO vparboot(1M), vparcreate(1M), vpardump(1M), vparextract(1M), vparmodify(1M), vparreloc(1M), vparremove(1M), vparreset(1M), vparstatus(1M), vparutil(1M), vparresources(5). |