7-3 distribute-list access-list-number out

 <  Free Open Study  >  

7-3 distribute-list access-list-number out

Syntax Description:

  • access-list-number ” Standard IP access number used to determine which routes learned via OSPF will be prevented from being installed in the IP routing table. The range of access list numbers is 1 “99 and 1300 “2699.

Purpose: For distance vector protocols (RIP, IGRP, EIGRP), this command prevents routes selected by the access list from being advertised to a neighbor. OSPF is a link-state protocol and does not advertise routes to a neighbor but advertises a link-state database. The neighbor determines the routes from the information in the link-state database. Therefore, this command has no effect when used with OSPF.

Initial Cisco IOS Software Release: 10.0. The interface-type and interface-number parameters were added in 11.2.

 <  Free Open Study  >  


Cisco[r] OSPF Command and Configuration Handbook
Cisco OSPF Command and Configuration Handbook (paperback)
ISBN: 1587055406
EAN: 2147483647
Year: 2002
Pages: 236

Similar book on Amazon

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net