mode

mode

---

Displays status of COM, LPT, and console ports.

Syntax

 mode /status 

Examples

  mode /status  Status for device LPT1: -----------------------     Printer output is not being rerouted.        Status for device COM2: -----------------------     Baud:            1200     Parity:          None     Data Bits:       7     Stop Bits:       1     Timeout:         OFF     XON/XOFF:        OFF     CTS handshaking: OFF     DSR handshaking: OFF     DSR sensitivity: OFF     DTR circuit:     ON     RTS circuit:     ON        Status for device COM1: -----------------------     Baud:            1200     Parity:          None     Data Bits:       7     Stop Bits:       1     Timeout:         OFF     XON/XOFF:        OFF     CTS handshaking: OFF     DSR handshaking: OFF     DSR sensitivity: OFF     DTR circuit:     ON     RTS circuit:     ON        Status for device CON: ----------------------     Lines:          300     Columns:        80     Keyboard rate:  31     Keyboard delay: 1     Code page:      437 

Notes

The mode command also includes options for configuring COM, LTP, and console ports; type mode /? for more info .

See Also

Devices