bootcfg dbg1394

bootcfg /dbg1394

new in WS2003

---

Configures IEEE 1394 port debugging for a specified OS entry.

Syntax

 bootcfg /dbg1394 {ON  OFF} [/ch   Channel   ] /id   OSEntryLineNum   

Options

{ON OFF}

Enables/disables remote debugging support by adding/removing /dbg1394 switch to OS entry specified by OSEntryLineNum .

/ch Channel

Indicates channel used for debugging (must be integer between 1 and 64). Omit if OFF is specified.

Examples

Enable IEEE 1394 debugging by adding the /dbg1394 switch with channel 8 to OS entry 2 in boot.ini :

  bootcfg /dbg1394 ON /ch 8 /id 2  SUCCESS: The OS load options have been changed for the BootID: 2. 

Verify the result:

  bootcfg  Boot Loader Settings -------------------- timeout:30 default:multi(0)disk(0)rdisk(0)partition(1)\WINDOWS Boot Entries ------------ Boot entry ID:    1 OS Friendly Name: WS2003, Enterprise Path:             multi(0)disk(0)rdisk(0)partition(1)\WINDOWS OS Load Options:  /fastdetect /noguiboot Boot entry ID:    2 OS Friendly Name: WS2003 Enterprise Path:             multi(0)disk(0)rdisk(0)partition(1)\WINDOWS OS Load Options:  /fastdetect /noguiboot /debug /debugport=1394 /channel=8 

Now turn off IEEE 1394 debugging:

  bootcfg /dbg1394 OFF /id 2  SUCCESS: The OS load options have been changed for the BootID: 2. 

Verify:

  bootcfg  Boot Loader Settings -------------------- timeout:30 default:multi(0)disk(0)rdisk(0)partition(1)\WINDOWS Boot Entries ------------ Boot entry ID:    1 OS Friendly Name: WS2003, Enterprise Path:             multi(0)disk(0)rdisk(0)partition(1)\WINDOWS OS Load Options:  /fastdetect /noguiboot Boot entry ID:    2 OS Friendly Name: WS2003 Enterprise Path:             multi(0)disk(0)rdisk(0)partition(1)\WINDOWS OS Load Options:  /fastdetect /noguiboot 

Notes

Use bootcfg /debug if COM port debugging is required instead.

See Also

bootcfg , Recovery Console