With Juniper Networks routers, it is possible to display the output of operational-mode commands while in the configuration mode. To do this, you must use the run command in front of the operational-mode command that you want to execute. The following example shows how to execute the operational-mode command show route protocol isis from the configuration mode: [edit] lab@Chicago# run show route protocol isis inet.0: 32 destinations, 32 routes (32 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.0.0.0/24 *[IS-IS/18] 3d 11:20:48, metric 30, tag 2 > to 10.0.21.1 via ge-1/0/0.0 10.0.1.0/24 *[IS-IS/18] 3d 11:20:48, metric 30, tag 2 to 10.0.21.1 via ge-1/0/0.0 |